Installation and connection
en
11
The appliance is fully functional within
the permitted room temperature.
If an appliance with climate class SN
is operated at colder room temperat-
ures, the appliance will not be dam-
aged up to a room temperature of
5 °C.
4.3 Installing the appliance
▶
Install the appliance in accordance
with the enclosed installation in-
structions.
4.4 Preparing the appliance
for the first time
1.
Remove the informative material.
2.
Remove the protective foil and
transit bolts, e.g. remove the ad-
hesive strips and carton.
3.
Clean the appliance for the first
time. →
4.5 Connecting the appliance
to the drinking water con-
nection
Requirements
¡
A corner valve must be installed
on the water connection and be
freely accessible following installa-
tion of the appliance.
¡
The water connection is checked
and is of drinking water quality.
1.
Rinse the drinking water connec-
tion thoroughly until the drinking
water is no longer cloudy and con-
tains no deposits.
If the drinking water is still cloudy
or contains deposits, install an ex-
ternal water filter system.
2.
Install the drinking water connec-
tion according to the enclosed in-
stallation instructions.
4.6 Connecting the appliance
to the electricity supply
1.
Insert the non-heating appliance
plug of the power cable into the
appliance.
2.
Insert the mains plug of the appli-
ance's power cable in a socket
nearby.
The connection data of the appli-
ance can be found on the rating
plate.
13
,
3.
Check the mains plug is inserted
properly.
a
The appliance is now ready for
use.
