823_58300000113594_ara_en_u
– 26.03.2015
Seite 12 von 50
5
FUNCTIONS
5.1
Test programme
Entering the programme:
►
Press the Lock button.
►
Press and hold down the freezer set button.
►
Press the Super Freeze button 5 times.
Press the Freezer Set button to select the individual test steps and the
fault displays.
Test step
Function
1
Run time of the appliance (in hours and minutes) After 24
h the display starts at 1 min
2
Freezer compartment sensor temperature
(e.g.
–F1 65 = –16.5 °C)
3
Defrosting sensor temperature (e.g.
–d1 82 = –18.2 °C)
4
Refrigerator compartment sensor temperature
(e.g.
– r0 55 = 5.5 °C)
5
Room sensor temperature (e.g. t2 82 = 28.2 °C)
6
Change water supply quantity display P100
7
Press the Dispenser button to display the remaining time
(in hours and minutes) until the water filter is next
changed. FiLt display
8
If there is a fault, it is displayed here (see Fault display)
Exiting the programme:
►
Press the Lock button for 4 sec.
If no button is pressed for 4 min., the appliance automatically switches
back to normal mode.
