background image

4

en | Safety

Surface Mount Dual 10” Subwoofer Accessories

2018.07 | 02 | F.01U.347.595

Installation note

Bosch Security Systems B.V. | Electro-Voice

1

Safety

1.1

Suspensions

!

Warning!

Suspending any object is potentially dangerous and should only be attempted by individuals
who have a thorough knowledge of the techniques and regulations of suspending objects
overhead. Electro-Voice strongly recommends all loudspeakers be suspended taking into
account all current national, federal, state, and local laws and regulations. It is the
responsibility of the installer to ensure all loudspeakers are safely installed in accordance
with all such requirements. When loudspeakers are suspended, Electro-Voice strongly
recommends the system be inspected at least once per year or as laws and regulations
require. If any sign of weakness or damage is detected, remedial action should be taken
immediately. The user is responsible for making sure the wall, ceiling, or structure is capable
of supporting all objects suspended overhead. Any hardware used to suspend a loudspeaker
not associated with Electro-Voice is the responsibility of others.

!

Caution!
It is the installer's responsibility to determine and use the proper mounting hardware for
the wall construction type.

Disregarding this caution could result in damage to the product and personal injuries may
occur.

1.2

Notices

Copyright and disclaimer

All rights reserved. No part of this document may be reproduced or transmitted in any form by
any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior
written permission of the publisher. For information on getting permission for reprints and
excerpts, contact Bosch Security Systems, Inc.
The content and illustrations are subject to change without prior notice.

Summary of Contents for IP-10D-CB













Reviews: