|
3
Bosch Power Tools
X 275 007 BAI | (23.1.15)
English
Supplement to original operating
instructions
Safety Notes
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious in-
jury.
Save all safety warnings and instructions for future refer-
ence.
Read the safety warnings and instructions in the operat-
ing instructions of the drive unit/on-board computer, bat-
tery and charger as well as in the operating instructions of
your eBike.
Intuvia eShift information menu
eShift with NuVinci H|Sync
The information menu for integrating the NuVinci H|Sync con-
tinuously variable automatic transmission is as follows.
Information menu
–
“Clock”:
Current time
–
“Max. speed”:
Maximum speed achieved since the last
reset
–
“Avg. speed”:
Average speed achieved since the last reset
–
“Trip time”:
Trip time since the last reset
–
“Range”:
Estimated range of the available battery-pack
charge (for constant conditions such as assistance level,
route profile, etc.)
–
“Odometer”:
Display of the total distance travelled with
the eBike (cannot be reset)
–
“NuVinci Cadence/Gear”:
Press the
“i”
button for more
than 1 s to access the NuVinci menu item from any menu
item in the information menu.
To switch from the
“NuVinci Cadence”
mode to the
“NuVinci Gear”
mode, press the
“i”
button for 1 s.
To switch from the
“NuVinci Gear”
mode to the
“NuVinci
Cadence”
mode, all you have to do is briefly press the
“i”
button. The default setting is
“NuVinci Cadence”
.
In the
“Cadence”
mode you can use the
“–”
or
“+”
button
on the operating unit to increase or decrease the desired
cadence. If you hold down the
“–”
or
“+”
button, the ca-
dence will increase or decrease in steps of five. The de-
sired cadence is shown on the display.
In the
“Gear”
mode you can use the
“–”
or
“+”
button on
the operating unit to switch back and forth between sever-
al defined transmission ratios. The engaged transmission
ratio (gear) is shown on the display.
–
“Trip distance”:
Distance covered since the last reset
eShift with SRAM DD3 Pulse
The gear hub of the SRAM DD3 Pulse works on a speed-de-
pendent basis. Regardless of which gear is engaged on the de-
railleur gears, one of the three gears of the gear hub will auto-
matically be engaged.
The engaged gear will be shown briefly on the display whenev-
er the gear of the gear hub is shifted.
The drive unit recognises the gear shift and briefly reduces
the motor assistance level as a result of it, which means the
gear can also be shifted at any time under load or on a hill.
The information menu for displaying the engaged gear of the
gear hub is as follows.
Information menu
–
“Clock”:
Current time
–
“Max. speed”:
Maximum speed achieved since the last
reset
–
“Avg. speed”:
Average speed achieved since the last reset
–
“Trip time”:
Trip time since the last reset
–
“Range”:
Estimated range of the available battery-pack
charge (for constant conditions such as assistance level,
route profile, etc.)
–
“Odometer”:
Display of the total distance travelled with
the eBike (cannot be reset)
–
“Gear”:
Currently engaged gear of the automatic gear hub
is displayed.
–
“Trip distance”:
Distance covered since the last reset
592
Inkompatible Komponente
Kompatibles Display einsetzen. Falls das Problem weiterhin besteht,
kontaktieren Sie Ihren Bosch eBike-Händler.
593
Konfigurationsfehler
Starten Sie das System neu. Falls das Problem weiterhin besteht, kon-
taktieren Sie Ihren Bosch eBike-Händler.
595, 596
Konfigurationsfehler
Überprüfen Sie die Verkabelung zum Getriebe und starten Sie das Sys-
tem neu. Falls das Problem weiterhin besteht, kontaktieren Sie Ihren
Bosch eBike-Händler.
7xx
Getriebefehler
Bitte beachten Sie die Betriebsanleitung des Schaltungsherstellers.
Code
Ursache
Abhilfe
Range
odometer
(+/-) NuVinci Cadence
(1 s)
(1 s)
(+/-) NuVinci Gear
