English |
21
ule to ensure that the two systems
never run simultaneously.
u
If for any reason the product is sub-
merged, take it away from water and
turn it off using the isolator switch.
Do not attempt to switch the product
on but contact your Bosch Service
Centre.
u
Do not modify this product.
Unau-
thorized modifications may impair
the safety of your product and may
result in increased noise and vibra-
tion.
Turn off the product using the
isolator switch:
– before clearing a blockage,
– before checking, cleaning or work-
ing on the machine,
– before storage
– if the machine vibrates abnormally
(stop and check immediately),
– after striking a foreign object, in-
spect the machine for damage and
get advice on necessary repairs
from your Bosch Service Centre.
Maintenance
u
Always wear gardening gloves
when handling or working near the
sharp blades.
u
Before working on the mower,
turn it off using the isolator
switch.
u
Before working on the docking sta-
tion or power supply, remove plug
from mains.
Clean the exterior of the machine thor-
oughly using a soft brush and cloth.
Do
not use water, solvents or polishes.
Remove all grass and debris, espe-
cially from the ventilation slots.
Turn the mower upside down and
clean the blade area and the swivel
castors regularly. Use a stiff brush or
scraper to remove compacted grass
clippings (see figure
I
).
Blades are reversible.
u
Make sure all nuts, bolts and screws
are tight to ensure safe working with
the garden tool. (see figure
J
)
u
Periodically visually inspect the ma-
chine and replace worn or damaged
parts for safety.
u
Ensure that only official Bosch re-
placement parts are used.
u
Replace all blades and bolts as a set
as required.
Storage in winter
u
Turn off the mower using the isol-
ator switch.
u
The mower will operate between
5 °C and 45 °C. During the winter
season once the temperature in the
garden is consistently below 5 °C
store the mower and the docking sta-
tion in a secure, dry place, out of the
reach of children.
Do not place other objects on the
mower or docking station.
It is recommended to use the original
packaging when transporting the In-
dego over long distances.
Bosch Power Tools
F 016 L81 041 | (15.04.2020)
Summary of Contents for Indego M 700
