MAP 5000
Connections | en
45
Bosch Security Systems B.V.
Installation manual
2019-09 | 25 | F.01U.168.332
Data bus connection of the control center on the external BDB
3.3
Connecting the main panel
This chapter describes the connection of the following main panels:
–
MAP Main Panel (ICP-MAP5000-2)
–
MAP Main Panel with IP Communicator (ICP-MAP5000-COM) including the MAP GSM
module (ITS-MAP0008).
–
MAP Main Panel Small (ICP-MAP5000-S)
–
MAP Main Panel Small with IP Communicator (ICP-MAP5000-SC) including the MAP GSM
module (ITS-MAP0008).
Connection strip of the main panel
Connection
Description
1
External BDB connector
2
Two programmable voltage outputs (28 V DC / 1 A)
3
Two programmable dry relay outputs (toggle switches)
4
Voltage output AUX (28 V DC / 1 A)
5
Eight supervised inputs
6
Input for panel tamper switch
