Overview of the service menu
21
HPC 410 – 6721832682 (2021/02)
– Cooling frost sensor
– Priority heating circuit 1
– Heating circuit 1 ... 4
– Heating circuit installed
– Remote ctrl
– Heating system
– Heating circuit function
– Control type
– Set heating curve
– Design temperature
– End point
– Base line
– Max. flow temperature (Maximum flow temperature)
– Solar effect
– Room influence
– Room temperature offset
– Constant heat below
– Frost prot.
– Frost prot. limit temp. (Frost protection limit temperature)
– Sum./winter changeover
– Summer mode from
– Cooling mode from
– Heating direct start limit
– Cooling switch-off delay
– Cooling switch-on delay
– Heating switch-off delay
– Heating switch-on delay
– Room temp. switch. diff.
– Dew point temp. diff.
– Min. set flow temperature
– Mixer
– Mixer run time
– Shown in standard display (Visibility in the standard display)
– Screed drying
– Activated
– Wait time before start
– Start phase period
– Start phase temp.
– Heat-up phase increment
– Ht-up phase temp. diff. (Heat-up phase temperature differential)
– Holding phase period
– Holding phase temp.
– Cool-down phase incr.
– Cool-down ph. temp.diff. (Cool-down phase temperature
differential)
– End phase period
– End phase temp.
– Max. interruption time (Maximum interruption time)
– Screed dry. System (Screed drying system)
– Screed dry. HC 1 ...4 (Screed drying heating circuit 1 ... 4)
– Start
– Interrupt
– Continue
DHW settings
– DHW operation energy manager
– Switch-on temp. EM
– Switch-off temperature EM
– DHW comfort
– Switch-on temperature
– Switch-off temperature
– Ramp-up delay
– DHW Eco
– Switch-on temperature
– Switch-off temperature
– Ramp-up delay
– DHW Eco+
– Switch-on temperature
– Switch-off temperature
– Ramp-up delay
– DHW circ. pump
– Circulation oper. mode
– DHW circ. start freq.
– Autom. therm. disinfect.
– Therm. disinfection day
– Therm. disinfection time
– Maximum duration
– Therm. disinfection temp.
– Daily heat-up
– Daily heat-up time
– DHW alternating operation
– DHW alt. operation on
– Prioritise DHW for
– Heating priority for
– Heat. circ. p. on, DHW op.
DHW settings (Fresh water station)
– Max. DHW temp.
– DHW comfort
– DHW Eco
– Circulation time
– Circulation oper. mode
– DHW circ. start freq.
– Circulation pulse
– Automat. therm. disinfect.
– Therm. disinfection day
– Therm. disinfection time
– Daily heat-up
– Daily heat-up time
– Fault display
– Keep hot
– Ht main. sw.-on temp. diff
– Sw.diff. ret. stratification
Ventilation settings
–
Installer manual for the ventilation unit.
Pool settings
– Pool module available?
– Pool mixing valve
– Control rate pool op.
– Del. aux. heater pool oper.
– Logic external connection
Solar settings
– Sol.therm.sys. instlld
– Change solar configuration
– Current solar configuration
– Solar parameters
–
Installer manual for the solar thermal system.
Summary of Contents for HPC 410
Page 23: ......
