2.2 High-voltage
capacitor
The high-voltage capacitor can be tested by ‘ohmic’ measurement’
(resistance measurement range 20
ΜΩ
).
A correctly functioning capacitor indicates transient continuity.
The resistance then increases proportionally with the load.
A defective capacitor (e.g. short-circuit) indicates permanent
continuity.
The measuring instrument must indicate infinitely between the
connection and housing.
Page 5 of 23 pages
This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
______________________________________________________________________________________________________________________________________________________________________________
Copyright by BSH Home Appliances Corporation 1901 Main Street, Suite 600, Irvine CA 92614 700_ 58300000192890_ARA_EN_A 800 444-9091