Bosch HGG22B120T Instruction Manual Download Page 7

Page: 7 / 24

Causes of damage

Hob
Caution!

■

Only use the burners when cookware has been placed on

top. Do not heat up empty pots or pans. The saucepan base

will be damaged.

■

Only use pots and pans with an even base.

■

Place the pot or pan centrally over the burner. This will

optimise transfer of the heat from the burner flame to the pot

or ban base. The handle does not become damaged, and

greater energy savings are guaranteed.

■

Ensure that the gas burners are clean and dry. The burner

cup and ¶burner cap must be positioned exactly.

■

Ensure that the top cover is not closed when the oven is

started up.

Damage to the oven

Caution!

■

Accessories, foil, greaseproof paper or ovenware on the

cooking compartment floor: do not place accessories on the

cooking compartment floor. Do not cover the cooking

compartment floor with any sort of foil or greaseproof paper.

Do not place ovenware on the cooking compartment floor if a

temperature of over 50 ºC has been set. This will cause heat

to accumulate. The baking and roasting times will no longer

be correct and the enamel will be damaged.

■

Water in a hot cooking compartment: do not pour water into

the cooking compartment when it is hot. This will cause

steam. The temperature change can cause damage to the

enamel.

■

Moist food: do not store moist food in the cooking

compartment when it is closed for prolonged periods This will

damage the enamel.

■

Fruit juice: when baking particularly juicy fruit pies, do not

pack the baking tray too generously. Fruit juice dripping from

the baking tray leaves stains that cannot be removed. If

possible, use the deeper universal pan.

■

Cooling with the appliance door open: only allow the cooking

compartment to cool when it is closed. Even if the appliance

door is only open a little, front panels of adjacent units could

be damaged over time.

■

Very dirty door seal: If the door seal is very dirty, the

appliance door will no longer close properly when the

appliance is in use. The fronts of adjacent units could be

damaged.Always keep the door seal clean.

■

Appliance door as a seat, shelf or worktop: Do not sit on the

appliance door, or place or hang anything on it. Do not place

any cookware or accessories on the appliance door.

■

Inserting accessories: depending on the appliance model,

accessories can scratch the door panel when closing the

appliance door. Always insert the accessories into the

cooking compartment as far as they will go.

■

Carrying the appliance: do not carry or hold the appliance by

the door handle. The door handle cannot support the weight

of the appliance and could break.

Damage to the plinth drawer

Caution!

Do not place hot objects in the plinth drawer. It could be

damaged.

Set-up, gas and electricity connection

Gas connection

Installation must only be performed by an approved expert or a

licensed after-sales service engineer in accordance with the

instructions specified under "Gas connection and conversion to

a different gas type".

For the licensed expert or after-sales service
Caution!

■

The setting conditions for this appliance are specified on the

rating plate on the back of the appliance. The gas type set in

the factory is marked with an asterisk (*).

■

Before setting up the appliance, check the grid access

conditions (gas type and gas pressure) and ensure that the

gas setting of the appliance meets these conditions. If the

appliance settings have to be changed, follow the instructions

in the section "Gas connection and conversion to a different

gas type".

■

This appliance is not connected to a waste gas main. It must

be connected and commissioned in accordance with the

installation conditions. Do not connect the appliance to a

waste gas main. All ventilation regulations must be observed.

■

The gas connection must be made via a fixed, i.e. not mobile

connection (gas line) or via a safety hose.

■

If using the safety hose, ensure that the hose is not trapped

or crushed. The hose must not come into contact with hot

surfaces.

■

The gas line (gas pipe or safety hose) can be connected to

the right or left-hand side of the appliance. The connection

must have an easily accessible locking device.

Safety information

The nominal operating pressure of the appliance is;
For natural gas (G20) 20 mBar, for LPG (G30) 30 mBar, for

LPG (G31) 37 mBar. The appliance must be operated at these

pressure values. All data on the rating plate of your appliance

relates to these pressure values. The manufacturer is not

responsible for results, performance or any risk caused by

operating the appliance at different values.

If the gas pressure in your gas supply grid!

for natural gas (G20) is higher than 25 mBar, for LPG (G30) is
higher than 36 mBar, for LPG (G31) is higher than 45 mBar,
you must use your appliance in connection with a suitable gas
regulator, for safety reasons. Connection, maintenance and
configuration of the gas regulator must be performed by an
authorised installation expert. If you do not know the gas
pressure in your gas supply grid, please ask your local supply
grid operator.

Faults in the gas installation/smell of gas

If you notice a smell of gas or faults in the gas installation, you

must

■

immediately shut off the gas supply and/or close the gas

cylinder valve

■

immediately extinguish all naked flames and cigarettes

■

switch off electrical appliances and lights

■

open windows and ventilate the room