13
How to set the gas grill
1.
Open the top cover. The top cover must remain open for as
long as the oven is in operation.
2.
Open the main gas supply to the appliance. Connect the plug
to the socket.
3.
Insert the protective plate into the groove under the control
panel.
The protective plate is inserted with the longer edge at the
front with the elbow pointing downwards.
Secure the protective plate in the groove underneath the
control panel using the retainers.
Make sure that the protective plate is engaged in the
retainers. If the protective plate cannot be pulled out, it is
correctly engaged. You can now use the protective plate
safely. Otherwise, insert the protective plate into a groove at a
slightly higher angle and make sure that it engages in the
retainers.
4.
Close the oven door so that it touches the protective plate.
5.
Press the function selector and turn it clockwise to the
(
grill setting.
6.
Keeping the function selector pressed, push the
8
ignition
button.
7.
The gas escaping from the gas grill is ignited using the
ignition button. To activate the safety ignition, press and hold
the function selector for 10 seconds.
8.
Check that the flame is lit. If it is not, repeat the process from
step 5.
9.
After 30 minutes, switch off the function selector. Once the
oven has cooled down, remove the protective plate again.
Cleaning the accessories
Before you use the accessories for the first time, clean them
thoroughly with hot soapy water and a soft dish cloth.
Advance cleaning of burner cup and cap
Clean the burner cap (1) and cup (2) with water and washing-
up liquid. Dry the individual parts carefully.
Place the burner cup and cap back on the burner shell (5).
Ensure that the igniter (3) and flame safety pin (4) are not
damaged.
The nozzle (6) must be dry and clean. Always position the
burner cap exactly over the burner cup.
Making settings on the hob
Your hob is equipped with four gas burners. The following
information explains how to light the gas burners and set the
size of flame.
Igniting the gas burners
Always position the burner cap exactly over the burner cup.
Openings on the burner cup are always unobstructed. All parts
must be dry.
1.
Open the top cover. The top cover must remain open for as
long as the oven is in operation.
2.
Turn the switch for the desired burner anticlockwise to the
large flame symbol
—
.
3.
Press and hold the burner knob and press the ignition button
at the same time. The gas burner ignites.
Summary of Contents for HGG223326Z
Page 1: ... en Instruction manual Free standing cooker HGG223326Z ...
Page 2: ......
