Page 25
Self Help - Cooktop
To avoid unecessary service charges, check these suggestions before calling for service.
Element cycles on the highest setting
Element cycles more than usual
A slight odor is noticeable when an element is
turned on
Cooktop controls will not turn on
Replacement razor blades for the scraper
Cooking results are not what was expected
•
This is normal. The temperature limiter operates
automatically to protect the glass ceramic surface
from extreme high temperature damage.
•
Pan base is warped and not making full contact with
the heating surface.
•
Base diameter of pan is too small for the size of the
element.
•
Pan ingredients have boiled dry.
•
Material of pan is a poor heat conductor; heat transfers
too slowly
•
This is normal with new cooktops and will disappear
after several uses.
•
Check the power source to see if a fuse has blown or
if the circuit breaker tripped.
•
Check power supply.
•
The scraper is packaged with single-edge, stainless
steel blades. Use a standard single-edge blade for
replacement.
•
The cooktop is not level.
•
Cooking pan does not fit the surface being used.
•
Cookware is not the type or size recommended.
QUESTION
SUGGESTED SOLUTIONS