Bosch HCE8584.1A, Instruction Manual

Page: 22 / 44

22
Setting the cleaning level
1.
Press the q button.
Cleaning level 3 is suggested. You can start the self-cleaning
immediately by pressing the n button.
If you wish to change the cleaning level:
2.
Select the desired cleaning level using the rotary selector.
3.
Start with
n
.
The oven door locks shortly after operation starts. The L
symbol lights up to indicate that the lock has been activated.
The oven door cannot be opened until the symbol goes out.
Once cleaning has finished
The oven stops heating. ‹‹ : ‹‹ appears in the display.
Cancelling the setting
Switch off the oven with
%
. Do not open the oven door until
the
L
symbol disappears.
Adjusting the cleaning level
Once cleaning starts, the cleaning level can no longer be
changed.
Setting cleaning to run overnight
So that you can use your oven throughout the day, delay the
end of the cleaning process to during the night. See the Time-
setting options section, setting a later end time.
After self-cleaning
Once the cooking compartment has cooled down, wipe out the
ash that has been left behind in the cooking compartment with
a damp cloth.
Care and cleaning
With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
■
Slight differences in the colours on the front of the oven are
caused by the use of different materials, such as glass,
plastic and metal.
■
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
■
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
Do not use
for the hob
■
undiluted washing-up liquid or dishwasher detergent
■
abrasive materials, scouring sponges
■
aggressive cleaners such as oven spray or stain removers
■
high-pressure cleaners or steam jet cleaners
Do not use
for the oven
■
harsh or abrasive cleaning agents
■
cleaning agents with high concentrations of alcohol
■
hard scouring pads and sponges
■
high-pressure cleaners or steam cleaners.
Wash new sponge cloths thoroughly before use.
Area Cleaning agents
Appliance exterior Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Do not use glass cleaners or
glass scrapers.
Stainless steel Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Remove flecks of limescale,
grease, starch and albumin (e.g. egg
white) immediately. Corrosion can form
under such residues.
Special stainless steel cleaning products
suitable for warm surfaces are available
from our after-sales service or from spe-
cialist retailers. Apply a thin layer of the
cleaning product with a soft cloth.
Hob Care: protective/care product for glass
ceramic
Cleaning: cleaning agents suitable for
glass ceramic.
Follow the cleaning instructions on the
packaging.
: Glass scraper for heavy soiling:
Remove the protective cover and clean
using the blade only. Caution, the blade
is very sharp. Risk of injury.
Cover the blade again after cleaning.
Replace damaged blades immediately.
Hob surround Warm soapy water:
Never clean with a glass scraper, lemon
juice or vinegar.
Door panels Glass cleaner:
Clean with a soft cloth.
Do not use a glass scraper.
Door cover Stainless steel cleaning agents (available
from our after-sales service or from spe-
cialist retailers):
Follow the manufacturer's instructions.