Bosch HBM56B551B, Instruction Manual

Page: 16 / 36

16
2.
Turn the rotary selector to select the required basic setting
3.
Press the
X
button.
4.
Change the basic setting by turning the rotary selector.
5.
You can now change other basic settings, as described in
points 2 to 4.
6.
Press and hold the
°
button until the clock appears. This
takes about four seconds. All changes are saved.
Cancelling
Press the
%
button. The changes are not applied.
Automatic switch-off
The
ó
main oven has an automatic switch-off function.
If you do not change the settings on your appliance for several
hours, the automatic switch-off function will be activated. The
oven stops heating. When this occurs, it is based on the set
temperature or grill setting.
The automatic switch-off function is
activated.
”‰ appears in the display. Operation in the main oven is
interrupted. Press any button to clear the indicator. You can
make new settings.
Remove automatic switch-off
To prevent the automatic switch-off activating when not wanted,
set a cooking time. The oven heats up until the cooking time
has expired.
Cleaning system
The cleaning system reheats the self-cleaning surfaces in the
cooking compartment.
The back wall, ceiling and side walls of the cooking
compartment are coated with a highly porous ceramic layer.
This coating absorbs and dispels splashes from baking and
roasting while the oven is in operation. If these self-cleaning
surfaces in the oven no longer clean themselves adequately,
they can be regenerated with the cleaning system.
Before cleaning
Remove accessories and cookware from the cooking
compartment.
Cleaning the cooking compartment floor
Before you set the cleaning system, clean the surfaces in the
cooking compartment that are not self-cleaning. Otherwise,
stains will develop that it is not possible to remove.
Use a dish cloth and hot soapy water or a vinegar solution. If
there are heavy deposits of dirt, use a stainless steel scouring
pad or oven cleaner. Only use when the cooking compartment
is cold. Never treat the self-cleaning surfaces with a scouring
pad or oven cleaner.
Cleaning system for the ó main oven
You can choose from three cleaning levels.
1.
Switch on the appliance and press the
p
button.
Cleaning level 3 is suggested. You can start the cleaning
process immediately with the
n
button.
If you wish to change the cleaning level:
2.
Select the desired cleaning level using the rotary selector.
3.
Press the n button to start the cleaning operation. The
cleaning time starts to count down.
Once the cleaning is finished
The main oven stops heating.
‹‹
:
‹‹
appears in the display.
Setting tips:
Cancelling the setting
Press and hold the n button until < 3D hot air, 160 °C
appears. You can make new settings.
Changing the cleaning level
Once the programme has started, you can no longer change
the cleaning level.
Setting cleaning to run overnight
So that you can use your oven throughout the day, delay the
end of the cleaning process to during the night. See Setting a
later end time in the Time ­ setting options section.
Cleaning system for the ò top oven
1.
Set the function selector for the top oven to
%
Top/bottom
heating.
2.
Set the temperature selector to s .
3.
After approximately one hour, turn the function selector to the
off position. The oven is switched off.
Level Degree of cleaning Cooking time
1 gentle approx. 45 minutes
2 medium approx. 1 hour
3 intensive approx. 1 hour,
15 minutes