13
Cancelling the end time
This is possible while the oven is in standby. Press the
0
button to open the menu. Press the
X
button and reset the
End time using the rotary selector. Press the
0
button to close
the menu.
Setting the timer
The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time.
1.
Press the
0
button.
The time-setting options menu appears.
2.
Set the running time for the timer using the rotary selector.
3.
Press the
0
button to close the Time-setting options menu.
The display returns to its previous state. The
U
symbol for the
timer appears, and the time can be seen counting down.
When the time has elapsed
A signal sounds. The time has elapsed. The display shows
U
00:00. You can cancel the signal earlier by pressing the
0
button.
Cancelling the timer time
Press the
0
button to open the time-setting options menu.
Using the rotary selector, turn the time back to 00:00. Press
the
0
button to close the menu.
Changing the timer time
Press the
0
button to open the time-setting options menu. Use
the rotary selector within the next few seconds to change the
time on the timer. Press the
0
button to close the menu.
Setting the clock
The oven must be switched off before you can set or change
the clock.
Following a power cut
Following a power cut, the "Basic settings" heading appears in
the display.
1.
Set the right time using the rotary selector.
2.
Press the
0
button.
The time is applied.
Changing the clock
Example: changing from summer to winter time.
1.
Press the
0
button.
The time-setting options menu appears.
2.
Use the
X
button to switch to the clock.
3.
Change the time using the rotary selector.
4.
Press the
0
button.
The Time-setting options menu closes. The time is changed.
Hiding the clock
The current time appears in the display when the oven is
switched off. You can hide the clock. For more information,
refer to the
Basic settings
section.
Memory
You can save the settings for a dish in the memory and call it
up again at any time.
The memory is useful for if you frequently prepare a specific
dish.
Saving settings in the memory
You cannot save the self-cleaning.
1.
Specify the type of heating, temperature and, if required, a
cooking time for the dish you wish to cook. Do not start. If
you want to save a programme: Select the programme and
enter the weight. Do not start.
2.
Press and hold the
f
button until "Memory saved" is
displayed.
The saved setting is shown in the display and can be started at
any time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
Starting the memory
You can start cooking at any time using the settings saved for
your dish.
1.
Press the
f
button briefly.
The saved settings are displayed. If "Memory location empty"
appears, no settings have been saved. You cannot start the
memory. Save the required setting first, as described under
Saving in the memory.
2.
Press the
n
button.
The memory setting starts.
Changing the settings
This can be done at any time. The setting you originally saved
appears the next time you start the memory.
Sabbath mode
When this setting is used, the temperature of the oven remains
at between 85 °C and 140 °C with Top/bottom heating. You
can set a time between 24 and 73 hours.
You can keep dishes in the cooking compartment hot for this
time without having to switch the oven on or off.
Starting Sabbath mode
Prerequisite: "Sabbath mode, yes" is activated in the basic
settings. See the
Basic settings
section.
1.
Press the
!
button.
3D hot air and 160 °C are suggested in the display.
2.
Turn the rotary selector anti-clockwise to Sabbath mode.
