Familiarising yourself with your appliance
en
7
Touch field
on the in-
side
Function
Use
4D hot air
Directly select the "4D hot air" type of heating.
Top/bottom heating
Select the "Top/bottom heating" type of heating directly.
Types of heating
Select the operating mode types of heating.
Temperature
Select the temperature in the cooking compartment.
AutoPilot
Select the AutoPilot operating mode with cooking programmes.
Weight
Select the weight for the operating mode.
Time-setting options
Select the time-setting options.
Rapid heating
Starts or cancels rapid heating for the cooking compartment.
4.4 Control ring
You can use the control ring to change the setting val-
ues that are shown in the display.
If you have reached the maximum value for setting val-
ues, such as the temperature, minimum or maximum
value, this value remains in the display. If required, use
the control ring to turn the value back again.
For lists, e.g. the types of heating, the first value starts
again after the last value.
4.5 Display
The display shows the current setting values on differ-
ent levels.
Value in the
foreground
The value in the foreground is high-
lighted in white. You can use the control
ring to change the value directly.
Once operation has started, the temper-
ature or level is displayed in the fore-
ground.
Value in the
background
Values in the background are displayed
in grey. To change the value using the
control ring, select the required function
in advance.
Enlarge-
ment
As long as you use the control ring to
change a value, only this value will be
displayed as enlarged.
Display ring
The display ring is located around the outside of the
display.
¡
Position indicator
If you change a value, the display ring shows you
where you are in the selection list. The display ring
may be continuous or divided into segments de-
pending on the settings area and the length of the
selection list.
¡
Progress indicator
During operation, the display ring displays the pro-
gress and turns red at second-long intervals.
As the cooking time counts down, one segment of
the display ring disappears every second.
Temperature display
The heating line and the residual heat indicator show
you the temperature in the cooking compartment.
Due to thermal inertia, the temperature that is displayed
may differ slightly from the actual temperature inside
the cooking compartment.
¡
Heating line
Once operation has started, the white line below the
temperature turns red as the cooking compartment
heats up. When you are preheating the appliance,
the optimal time to place your food in the cooking
compartment is as soon as the entire line has
turned red.
With set levels such as grill settings, the heating line
turns red immediately.
¡
Residual heat indicator
When the appliance is switched off, the display ring
shows the residual heat in the cooking compart-
ment. As the residual heat dissipates, the display
ring gets darker before eventually disappearing
completely.
4.6 Cooking compartment
The functions in the cooking compartment make your
appliance easier to use.
Shelf supports
The rails in the cooking compartment enable you to
place accessories at different heights.
Your appliance has five shelf positions. The shelf posi-
tions are numbered from bottom to top.
You can remove the rails, e.g. for cleaning.
Self-cleaning surfaces
The self-cleaning surfaces in the cooking compartment
are coated with a porous, matt ceramic layer and have
a rough surface. When the appliance is in operation,
the self-cleaning surfaces absorb splashes from roast-
ing or grilling and break them down.
