en
Installation instructions
32
Cable colour
Cable type
Blue
Neutral conductor (zero)
Brown
Phase conductor (external
conductor)
17.10 Only Sweden, Finland and Norway
You can also connect the appliance to the protective
contact system with the enclosed plug. The plug must
be accessible following the installation. If the plug can
no longer be accessed following installation, provide a
separator in the phases in the fixed electrical installa-
tion in accordance with the set-up instructions.
17.11 Securing the appliance
¡
Slide the appliance in fully and centre it.
¡
Screw the appliance into place.
The gap between the worktop and the appliance must
not be closed by additional battens.
Do not attach any thermal insulation strips to the side
panels of the surround unit.
To remove:
¡
Disconnect the appliance from the power supply.
¡
Undo the fastening screws.
¡
Lift the appliance slightly and pull it out completely.
