Bosch HBC86P753B, Instruction Manual

Page: 12 / 40

12
6.
Set the cooking time using the rotary selector.
7.
Press the
n
button.
Appliance operation begins. You can see the cooking time
counting down in the status bar.
The cooking time has elapsed
A signal sounds. Operation has finished. The status bar shows
00:00:00. You can cancel the signal before it has finished
sounding by pressing the 0 button.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Changing the cooking time
Press the
0
button and switch to cooking time by turning the
rotary selector. Press the
X
button and turn the rotary selector
to change the cooking time. Press the
0
button.
Opening the oven door during cooking
Operation is suspended. The oven is paused. The
n
symbol
flashes on the status bar. Close the door and press the
n
button again. The programme will then continue.
Pausing operation
Press the n button briefly. The oven is paused. Press the n
button again to continue operation.
Cancelling operation
Press and hold the
n
button until “Select function” appears.
You can now change the settings.
Setting a later end time
See the section entitled Time-setting options , Setting a later end
time.
Series of operations
You can use the SeriesOperations function to set up to three
operating modes and then start.
Requirement: you must set a cooking time for each step.
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
Set a cooking time for each step in the series of operations.
1.
Press the
2
button.
The button lights up. “SeriesOperations” appears in the
display as the heading. The 1 for the first step in the series of
operations is in brackets.
2.
Select and set the desired operating mode.
3.
Press the
Y
button to return to [1] and use the rotary
selector to select [2] for the second step in the series of
operations.
4.
Select and set the desired operating mode.
5.
Press the Y button to return to [2] and use the rotary
selector to select [3] for the third step in the series of
operations.
6.
Select and set the desired operating mode.
7.
Press the n button.
Appliance operation begins.
Note:
The first step in the series of operations appears in the
display. The cooking time starts counting down.
The cooking time has elapsed
A signal sounds. The series of operations is finished. You can
stop the audible signal by pressing the 0 button.
Changing the setting
Changes can only be made before operation begins.
1.
Press the Y button to move upwards until 1, 2 or 3 appears
in the brackets.
2.
Use the rotary selector to select the step that you wish to
change.
3.
Change the setting.
Cancelling operation
Press and hold the
n
button until “Select function” appears.
You can now change the settings.
Time-setting options
You can call up the time-setting options menu by pressing
the 0 button. The following functions are available:
If the oven is switched off:
■
Setting the timer
■
Setting the clock
If the oven is switched on: