Bosch HBC86P753B, Instruction Manual

Page: 11 / 40

11
Notes
■
When you press a button, the selected power lights up.
■
The microwave power can be set to 1000 watts for a
maximum of 30 minutes. With all other power settings a
maximum cooking time of 1 hour 30 minutes is possible.
Setting the microwave
Example in diagram: microwave power setting 360 W, cooking
time 17 minutes.
1.
Press the button for the microwave power setting you require.
The button lights up. The heading “Microwave” appears in
the display. A suggested cooking time is displayed.
2.
Set the cooking time using the rotary selector.
3.
Press the n button.
Appliance operation begins. The cooking time starts counting
down.
The cooking time has elapsed
A signal sounds. Microwave operation has finished. The
cooking time shows 00:00 min:sec. You can cancel the audible
signal before it finishes sounding by pressing the
0
button.
Opening the oven door during cooking
Operation is suspended. After closing the door, press the
n
button briefly. The programme will then continue.
Pausing operation
Press the n button briefly. The n symbol flashes on the
status bar. The oven is paused. Press the n button again. The
programme will then continue.
Changing the cooking time
This can be done at any time. Change the cooking time using
the rotary selector.
Cancelling operation
Press and hold the
n
button until the heading “Select
function” appears. You can now change the settings.
Combination
This involves the simultaneous operation of one type of heating
with the microwave. Using the microwave makes your meals
ready more quickly, and they are still nicely browned. You can
set a cooking time of up to 1 hour 30 minutes.
Suitable types of heating
■
3D hot air
■
Hot air
■
Top/bottom heating
■
Hot air grilling
■
Grill, large area
■
Grill, small area
Suitable microwave power settings
Except for 1,000 W, you can combine any microwave power
setting with a heating type.
Setting a combination
Example in diagram: Top/bottom heating setting 200 °C and
microwave setting 360 W, 17 minutes.
1.
Press the
!
button.
“Types of heating” appears as the heading. 3D hot air and
160 °C are suggested in the display.
2.
Set the required heating type using the rotary selector.
3.
Press the
X
button to switch to the temperature.
4.
Use the rotary selector to change the temperature.
5.
Press the button for the microwave power setting you require.
The selected button lights up. The heading changes to
“Combination”.