22
| English
pany for assistance.
Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age or may cause an electric shock.
u
Do not touch grinding and cutting discs until they have
cooled down.
The discs can become very hot while work-
ing.
u
Release the On/Off switch and set it to the off position
when the power supply is interrupted, e. g., in case of
a power failure or when the mains plug is pulled.
This
prevents uncontrolled restarting.
u
Secure the workpiece.
A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for cutting, roughing and brush-
ing metal and stone materials, as well as making holes in
stone materials using diamond core cutters, without the use
of water.
A special protective guard for cutting must be used when
cutting bonded abrasives.
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind concrete.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Unlocking lever for protective guard
(2)
Spindle lock button
(3)
On/off switch
(4)
Speed preselection thumbwheel
(GWS 13-125 CIE / GWS 15-125 CIE /
GWS 15-125 Inox / GWS 17-125 CIE /
GWS 17-125 CIT / GWS 17-125 Inox /
GWS 19-125 CIE)
(5)
Auxiliary handle (insulated gripping surface)
(6)
Protective guard for cutting
a)
(7)
Protective guard for grinding
(8)
Extraction guard for grinding
a)
(9)
Mounting flange with O‑ring
(10)
Carbide grinding head
a)
(11)
Grinding disc
a)
(12)
Cutting disc
a)
(13)
Quick-clamping nut
a)
(14)
Clamping nut
(15)
Two-pin spanner for clamping nut
a)
(16)
Grinding spindle
(17)
Handle (insulated gripping surface)
(18)
Extraction guard for cutting with cutting guides
a)
(19)
Diamond cutting disc
a)
(20)
Hand guard
a)
(21)
Cup brush
a)
(22)
Rubber sanding pad
a)
(23)
Abrasive disc
a)
(24)
Round nut
a)
(25)
Diamond annular cutter
a)
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Angle grinder
GWS
9-115
9-125
11-125
12-125 CI
12-125 CI
Article number
3 601 G9B 0..
3 601 G9C 0..
3 601 G9D 0.. 3 601 G93 06. 3 601 G93 0G.
Rated power input
W
900
900
1100
1150
1200
Power output
W
530
530
740
530
640
Rated speed
min
-1
11,500
11,500
11,500
11,500
11,500
Speed adjustment range
min
-1
–
–
–
–
–
Max. grinding disc dia-
meter
mm
115
125
125
125
125
1 609 92A 6PL | (15.06.2021)
Bosch Power Tools
Autogoods “130”
130.com.ua
