7
Using the Remote Control
6 720 606 990
control (Fig. 7, pos. 3) pressed for 3
seconds.
Fig. 7
Memorising water
temperature
B
Only one tem perature can be
m em orized using the "Program "
button on the remote control.
B
At this point the remote control will
display the memorized temperature .
When the hot water tap is turned on,
the water heater will supply hot
water at the temperature memorized
on the remote control.
If the temperature was memorized
using remote control buttons (it is
possible to combine up to six remote
controls), it can only be modified whilst
hot water is flowing if the same remote
control is used again (see chapter 4.6
"Priority Function").
Using
the
"Program"
button
(operation
with
memorized
temperature)
To operate the equipm ent with a
previously memorized temperature:
B
Press the "Program" button on the
remote control.
The remote control display or control
panel will now show the previously
memorized temperature. When the hot
water tap is turned on, the water heater
will supply hot water after a few
seconds,
at
the
memorized
temperature.
i
Apart
from
the
temperature that can be
memorized using the
"Program" button on the
control panel, a second
temperature
can
be
memorized
on
each
remote control using the
"Program" button, to
meet the needs of each
user.
Summary of Contents for GWH-635-ES
Page 1: ...Bosch Remote Control for GWH 635 ES 6 720 606 990 JS ...
Page 10: ...10 Maintenance 6 720 606 990 ...
Page 11: ...11 Maintenance 6 720 606 990 ...
Page 12: ......