English |
17
Bosch Power Tools
1 619 929 J34 | (18.7.11)
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in hard and soft-
wood, as well as in particle and fibre board. In this, mitre an-
gles from –60° to +60° as well as bevel angles from –2° to
47° are possible.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1
Scale for clearance of the saw blade to the parallel
guide
9
2
Guide groove for parallel guide
9
3
Angle stop
4
Recessed handles
5
Guide groove for angle stop
6
Blade guard
7
Clamping screw for mounting blade guard
6
8
Saw table
9
Parallel guide
10
V-guide groove on saw table for parallel guide
11
Mounting holes
12
Carrying handle
13
Saw-Table extension
14
Allen key (5 mm)
15
Ring spanner (23 mm)
16
Push stick
17
Tensioning lever for saw-table extension
18
Fastening bracket for saw stand GTA 600
19
Locking lever for adjustment of bevel angles
20
Handwheel
21
Crank for lowering and raising the saw blade
22
Safety flap of On/Off switch
23
Adjustment screw for tightening tension of guide
37
24
Insert plate
25
Riving knife
26
Clamping lever for locking the height of blade guard
6
27
Saw blade
28
Lens
29
Profile rail
30
Cable holder
31
Retaining bracket for storage of the auxiliary parallel
guide
Wear safety goggles.
Do not dispose of power tools into house-
hold waste!
Observe the dimensions of the saw blade. The hole diameter
must match the tool spindle without play. Do not use reduc-
ers or adapters.
When changing the saw blade, pay attention that the kerf
width is not less than 2.3 mm and the blade thickness not
greater than 2.3 mm. Otherwise, there is danger that the riv-
ing knife (2.3 mm) becomes wedged in the workpiece.
The maximal possible workpiece height is 79 mm.
Left side
Indicates the rotation direction of the
handwheel for lowering (
transport
position
) and raising (
working posi-
tion
) the saw blade.
Right side
Indicates the position of the locking le-
ver for locking the saw blade and for
adjusting the bevel angle (saw blade
tiltable).
If required, lubricate the
power tool at the indicat-
ed locations.
Symbols and their meaning
OBJ_BUCH-1473-001.book Page 17 Monday, July 18, 2011 10:33 AM
