English |
15
Bosch Power Tools
1 609 929 S18 | (29/1/09)
Assembly
Delivery Scope
Please also observe the represen-
tation of the delivery scope at the
beginning of the operating instruc-
tions.
Before assembling the saw stand, check if all
parts listed below are provided:
Additionally required tools (not in delivery
scope):
– Phillips screwdriver
– Open-end spanner (10 mm, 8 mm, 6 mm)
Assembling the Mobile Stand Base
– Carefully remove all parts included in the de-
livery from their packaging.
– Remove all packaging material.
– For assembly, follow figures A – E. Also ob-
serve the following notes.
For Fig. A:
– Bolt the upper frame
6
and the bottom frame
7
together.
For Fig. B:
– Screw both the left and right wheel
8
to the
upper frame
6
.
Pay attention that the linkage bars
9
face out-
ward and that the tires of the wheels face to-
ward the bottom frame
7
.
Note:
Do not over-tighten the nuts. Parts bolted
together must move freely.
For Fig. C:
– Bolt the foot lever
10
to both wheels
8
.
For Fig. D:
– Screw the mounting plate
1
on both sides to
the upper frame
6
.
Note:
Do not over-tighten the nuts. Parts bolted
together must move freely.
For Fig. E:
– Bolt the left and right linkage bar
9
each to
the mounting plate
1
.
Note:
Do not over-tighten the nuts. Parts bolted
together must move freely.
No. Designation
Quantity
1
Mounting plate
1
6
Upper frame with lock
2
1
7
Bottom frame
1
8
Wheel with linkage bar
9
2
10
Foot lever
1
11
Fastening kit
consisting of:
– Hexagon bolt
M10 x 100
M10 x 50
M6 x 110
M6 x 75
M6 x 40
– Phillips screw
M8 x 50
– Washer
M10
M10 (clamping washer)
M6
– Lock nut
M10
M8
M6
6
2
4
4
4
6
18
2
8
6
6
4
OBJ_BUCH-857-003.book Page 15 Thursday, January 29, 2009 10:22 AM