English |
7
Bosch Power Tools
2 609 932 681 | (9.9.09)
Delivery Scope
Accessories shown or described are not part of
the standard delivery scope of the product. A
complete overview of accessories can be found
in our accessories program.
Intended Use
The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ce-
ramic plates and rubber while resting firmly on
the workpiece. It is suitable for straight and
curved cuts with mitre angles to 45°. The saw
blade recommendations are to be observed.
Technical Data
The technical data of the machine are listed in
the Table on page 44 of these operating instruc-
tions.
The values given are valid for nominal voltages
[U] of 220 – 240 V. For lower voltage and models
for specific countries, these values can vary.
Please observe the article number on the type
plate of your machine. The trade names of the
individual machines may vary.
Mounting and Operation
Action
Figure
Page
Inserting the Saw Blade
A
45
Ejecting the Saw Blade
B
45
Switching on the blower
C
45
Connecting the dust extraction
D
46 – 47
Adjusting the Cutting Angle
E
47 –48
Mounting the sliding shoe
F
49
Mounting the splinter guard
G
49
Orbital Action Settings
H
50
Adjusting the stroke rate preselection
I
50
Switching On and Off
J
51
Lubrication when cutting metal
K
52
Plunge Cutting
L
52
Mounting and use of the parallel guide
M
52 – 53
Selecting accessories
–
54 – 55
OBJ_BUCH-1088-001.book Page 7 Wednesday, September 9, 2009 8:56 AM
