English |
17
Cordless drill/driver
GSR 18V-60 FC
GFA 18-M
GFA 18-B
GFA 18-W
GFA 18-E GFA 18-WB
Signal range
Maximum 30 m
D)
–
–
–
–
–
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
C) The mobile terminal devices must be compatible with
Bluetooth
® Low Energy devices (version 4.1) and support the Generic Access Profile
(GAP).
D) The signal range may vary greatly depending on external conditions, including the receiving device used. The
Bluetooth
® range may be signi-
ficantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).
Noise/Vibration Information
GFA 18-E
GFA 18-M
GFA 18-B
GFA 18-W
GFA 18-WB
Noise emission values determined according to
EN 60745-2-1
for GFA 18-M, GFA 18-B, GFA 18-WB.
Noise emission values determined according to
EN 62841-2-2
for GFA 18-W, GFA 18-E.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
dB(A)
74
73
74.5
73.5
74.5
Sound power level
dB(A)
85
84
85.5
84.5
85.5
Uncertainty K
dB
3
3
3
3
3
Wear hearing protection
Vibration total values a
h
(triax vector sum) and uncertainty K determined according to
EN 60745-2-1
for GFA 18-M, GFA 18-
B, GFA 18-WB.
Vibration total values a
h
(triax vector sum) and uncertainty K determined according to
EN 62841-2-2
for GFA 18-W, GFA 18-
E.
Drilling in metal:
a
h
m/s
2
3.2
3.2
2.0
3.2
2.4
K
m/s
2
1.5
1.5
1.5
1.5
1.5
Screwdriving:
a
h
m/s
2
0.9
0.9
0.7
0.9
0.9
K
m/s
2
1.5
1.5
1.5
1.5
1.5
Noise emission values determined according to
EN 62841-2-2
.
Typically the A-weighted noise level of the power tool is:
Sound pressure level
87
dB(A); sound power level
98
dB(A). Uncertainty K =
3
dB.
Wear hearing protection
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage.
There is risk of injury
from unintentionally pressing the on/off switch.
Inserting the GCY 30-4 Bluetooth® Low Energy
Module (accessory)
Read the corresponding operating instructions for informa-
tion about the GCY 30-4
Bluetooth
® Low Energy Module.
Charging the Battery
u
Use only the chargers listed in the technical data.
Only
these chargers are matched to the lithium-ion battery of
your power tool.
Bosch Power Tools
1 609 92A 4RU | (31.10.2018)
