English |
17
Bosch Power Tools
1 619 P11 460 | (26.11.13)
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1
Cutting disc
2
Holding rod
3
Grinding accessory*
4
“PowerLight”
5
Spindle lock
6
On/Off switch
7
Speed regulator
8
Battery charge-control indicator
9
Battery pack
10
Direction-of-rotation arrow for grinding spindle
11
Dust protection cap (for detailed work)
12
Clamping nut
13
Collet of the collet chuck
14
Handle (insulated gripping surface)
15
Inner shank dimension L
0
16
Battery unlocking button
17
Open-end spanner/Screwdriver
18
Shank
19
Collet
20
Drive spindle
21
Dust protection cap (for working close to surfaces)
* The accessories illustrated or described are not included as
standard delivery.
Technical Data
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
is 74 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
a
h
=9 m/s
2
, K=1.5 m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardisation documents: EN 60745
according to the provisions of the directives 2009/125/EC
(Regulation 1194/2012), 2011/65/EU, 2004/108/EC,
2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 26.11.2013
Assembly
Battery Charging
Use only the battery chargers listed on the accessories
page.
Only these battery chargers are matched to the lith-
ium ion battery of your power tool.
Cordless multi rotary tool
GRO 10,8 V-LI
Article number
3 601 JC5 0..
Rated voltage
V=
10.8
Rated speed
min
-1
5000 –35000
Collet chuck-Ø
mm
3.2
Spanner flat of collet chuck
mm
9.55
Max. outer diameter:
– Cutting disc
– Grinding accessory
– Wire brush
– Grinding disc
– Drill bit
mm
mm
mm
mm
mm
38
22.5
20
20
3.2
Max. inner shank dimension L
0
mm
10
Max. shank length
mm
35
Weight according to
EPTA-Procedure 01/2003
kg
0.6
Technical data determined with battery from delivery scope.
Battery
Permitted ambient tempera-
ture
– when charging
– during operation*
– during storage
°C
°C
°C
0...+45
–20...+50
–20...+60
Recommended batteries
GBA 10,8V x,xAh 0-.
* Limited performance at temperatures <0
°C
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
OBJ_BUCH-2020-001.book Page 17 Tuesday, November 26, 2013 2:57 PM
