OPERATING THE APPLIANCE
GREENSTAR CAMRAY UTILITY/UTILITY SYSTEM 12/18 - 18/25 - 25/32
8 716 111 983a (02.07)
9
OPERATING THE APPLIANCE
FAULT CONDITIONS:
The burner lockout indicator/reset button can
indicate some basic faults:
Normal operation:
a) Lockout indicator OFF:
The burner will cycle on and off under the control
of the programmer/timer and the thermostats.
Lockout indicator light:
b) Light ON, boiler not firing:
1. Check oil level in the oil storage tank.
2. Press button (B). Boiler should fire.
3. If no response, wait 2 minutes - press
reset button (B) again.
4. If lockout light stays on, do not attempt
further resets. Contact your service
engineer for advice.
c) Light OFF, boiler not on, no heating/hot
water:
1. Ensure there is a power supply to the boiler.
2. Check the programmer is set to ON for
heating.
3. Check the setting of the room thermostat,
boiler temperature control/tank thermostat.
4. Press reset buttons (C and D).
5. If the boiler stays off contact your service
engineer for advice.
CD
B
a), c)
b)
US
ING Y
OU
R
AP
P
L
IANCE
C D
B
C
D
B
