-16-
Controls and Operation
Connecting External Audio
Sources
The 3.5 mm auxiliary port
15
can be
used to connect external audio sources:
1.
Open the connection ports cover
12
.
2.
Insert one end of the included audio
cable into auxiliary port (Fig. 1).
Connect the other end of the cable to
the audio source.
3.
Press the SOURCE button
7
until
“AUX” appears on the LCD screen.
After disconnecting the audio cable,
reattach the connection ports cover to
protect against dirt/debris.
USB Port
The USB port is designed to only charge
most USB-enabled devices such as cell
p h o n e s a n d e x t e r n a l d i g i t a l m e d i a
p l a y e r s . T h e a m p e r a g e o f t h e U S B
Charging Port is 1.2A.
The USB port is NOT designed to play
music files on USB flash drives or music
players.
Follow the steps below to charge your
USB-enabled device:
Insert the USB end of your device cable
into the USB port
16
. Insert the other
e n d o f y o u r d e v i c e c a b l e i n t o y o u r
device. Your device should begin to
charge.
Note:
The USB charging feature is not
g u a r a n t e e d t o w o r k w i t h a l l U S B -
enabled devices.
Hanging Hook
Your unit is equipped with a convenient
hook
8
for hanging. To release the hook,
gently pull the hook from the clasp on
the housing.
To reduce the risk of
i n j u r y , u s e c a r e i n
selecting the location for hanging the
unit.
To reduce the risk of
injury, Do not use the
hanging hook if it appears damaged or
deformed.
This could result in unstable
hanging and the unit unexpectedly falling.
•
Select a suitably sized and shaped
object that will provide adequate
hanging stability. An unstable hanging
surface could result in the tool
unexpectedly falling.
•
Ensure that the unit is hung out of
the way of walkways and working
areas with bystanders. The unit could
be bumped or a bystander could
become entangled causing the unit to
unexpectedly fall.
When not in use, rotate the hook into its
storage orientation and press into clasp.
