Bosch GOP 30-28, Original Instructions Manual

Page: 10 / 125

10 | English
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Fitting
u
Pull the plug out of the socket before carrying out any
work on the power tool.
Changing the tool
u
Wear protective gloves when changing tools. There is
a risk of injury when touching the application tools.
Selecting an application tool
Please observe the application tools intended for your power
tool.
Application tool GOP 30-28
GOP 40-30 GOP 55-36
The following table shows examples of application tools. You can find additional application tools in Bosch’s extensive range of
accessories.
Application tool Material Application
AIZ 10 AB
Starlock
10 × 20 mm bi-
metal plunge cut
saw blade for wood
and metal
Softwood, soft plastics,
gypsum, thin-walled alu-
minium and non-ferrous
metal profiles, thin metal
sheets, non-hardened
nails and bolts Smaller separation and plunge cuts; delicate adjustment
work in wood;
Example: Cutting recess for cable, plunge cuts in gypsum
boards, resawing recesses for locks and fittings
AIZ 32 EPC
Starlock
32 × 50 mm HCS
plunge cut saw
blade for wood
Softwood Splinter-free separation and plunge saw cuts thanks to
round sawing edge (Curved-Tec);
also for sawing close to the edge, in corners and difficult-
to-access areas;
Example: Plunge cut for the installation of a ventilation
grille or recess for plug sockets
PAIZ 32 APB
StarlockPlus
32 × 60 mm bi-
metal plunge cut
saw blade for wood
and metal
Composite materials
made from wood and soft,
non-ferrous metals, un-
hardened nails and bolts,
pipes made from non-fer-
rous metal and profiles of
smaller dimensions Quick and deep plunge cuts in wood, abrasive wooden ma-
terials and plastics, splinter-free work thanks to round cut-
ting edge (Curved-Tec);
Example: Quick separation of non-ferrous pipes and pro-
files of smaller dimensions, easy cutting through non-
hardened nails, bolts and steel profiles of smaller dimen-
sions
MAIZ 32 APB
StarlockMax
32 × 80 mm
plunge cut saw
blade for wood and
metal
Composite materials
made from wood and soft,
non-ferrous metals, un-
hardened nails and bolts,
pipes made from non-fer-
rous metal and profiles of
smaller dimensions Splinter-free, flush and very deep cuts and plunge cuts in
wood thanks to round cutting edge (Curved-Tec), soft and
non-ferrous metals and plastic;
Example: Recess for plug sockets and pipes, cutting
through non-hardened nails and bolts when flush with the
surface, sawing through window frames
AIZ 32 BSPB
Starlock
32 × 50 mm bi-
metal plunge cut
saw blade for hard-
wood
Hardwood, laminated
boards Splinter-free separation and plunge cuts in coated boards
or hardwood thanks to round sawing edge (Curved-Tec),
Japan toothing specially suited for hardwood;
Example: Installation of skylights, recess for plug sockets
1 609 92A 5NT | (09.06.2020) Bosch Power Tools