16
| English
1 609 92A 16H | (16.2.15)
Bosch Power Tools
16
Button for zero point of depth stop(GOF 1250 LCE)
17
Button for switching the unit of measure (mm/inch)
(GOF 1250 LCE)
18
On/Off switch for digital depth display(GOF 1250 LCE)
19
Adjustment range for depth-of-cut fine adjustment
20
Left handle (insulated gripping surface)
21
Display(GOF 1250 LCE)
22
Battery compartment cover(GOF 1250 LCE)
23
Release lever
24
Scale for depth-of-cut fine adjustment
25
Adjustment knob for depth-of-cut fine adjustment
26
Scale for depth-of-cut(GOF 1250 CE)
27
Slide with index mark(GOF 1250 CE)
28
Thumbwheel for speed preselection
29
On/Off switch
30
Extraction hose port
31
Open-end spanner with width across flats of 19 mm
32
Extraction hose (Ø 35 mm)*
33
Parallel guide
34
Rod for parallel guide (2x)
35
Wing bolt for parallel guide fine adjustment (2x)
36
Wing bolt for parallel guide coarse adjustment (2x)
37
Adjustment knob for parallel guide fine adjustment
38
Adjustable edge guide for parallel guide
39
Extraction adapter for parallel guide*
40
SDS guide-bushing adapter
41
Fastening screw for guide bushing adapter (2x)
42
Release lever for guide bushing adapter
43
Guide bushing
44
Pan head screw for guide plate fixing (5x)
45
Centring pin
46
Seal
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-17.
Typically the A-weighted noise levels of the product are:
Sound pressure level 76 dB(A); Sound power level 87 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-17:
a
h
=7.0 m/s
2
, K=1.5 m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Plunge router
GOF 1250 CE
GOF 1250 LCE
Article number
3 601 F26 0..
3 601 F26 1..
Rated power input
W
1250
1250
No-load speed
min
-1
10000 – 24000
10000 – 24000
Speed preselection
Constant electronic control
Soft starting
Connection for dust extraction
Digital depth display
–
Light ring
–
Tool holder
mm
inch
6 – 8
¼
6 – 8
¼
Plunge depth
mm
60
60
Weight according to EPTA-Procedure 01/2003
kg
3.6
3.7
Protection class
/
II
/
II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
OBJ_BUCH-2018-004.book Page 16 Monday, February 16, 2015 1:39 PM
