10
| English
u
Keep cutting tools sharp and clean.
Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
u
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into ac-
count the working conditions and the work to be per-
formed.
Use of the power tool for operations different
from those intended could result in a hazardous situation.
u
Keep handles and grasping surfaces dry, clean and
free from oil and grease.
Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
Service
u
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that the safety of the power tool is maintained.
Safety instructions for nibblers
u
This power tool is not suitable for bench-mounted use.
It must not be clamped into a vice or fastened to a work-
bench, for example.
u
Wear protective gloves during work and pay particu-
lar attention to the cord.
Sharp burrs develop on the cut
sheets; these can cause injury or damage the cord.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
u
Hold the power tool firmly with both hands and make
sure you have a stable footing.
The power tool can be
more securely guided with both hands.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for cutting sheet metal without
deforming the material and is suitable for straight cuts, cut-
outs and narrow curves.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Screw for handle holder
(2)
Handle holder
(3)
Auxiliary handle
(4)
Hex key
(5)
On/off switch
(6)
Thread for auxiliary handle
(7)
Screw for punch fastener
(8)
Hole on die holder
(9)
Screw for die
(10)
Punch
(11)
Guide plate
(12)
Hold-down device
(13)
Screw for hold-down device
(14)
Die
(15)
Die holder
(16)
Punch positioner
Technical Data
Nibbler
GNA 3,5
Article number
0 601 533 1..
Rated power input
W
620
Power output
W
340
No-load stroke rate n
0
min
-1
1000
Stroke speed under load
min
-1
670
Max. steel sheet cutting ca-
pacity
A)
mm
3.5
Cutting width
mm
6
Smallest curve radius
mm
70
Weight according to
EPTA-Procedure 01:2014
kg
3.5
Protection class
/
Ⅱ
A) with reference to steel sheet of up to 400 N/mm
2
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/Vibration Information
Noise emission values determined according to
EN 62841‑2‑8
.
Typically, the A-weighted noise levels of the power tool are:
Sound pressure level
85
dB(A); sound power level
96
dB(A). Uncertainty K =
3
dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to
EN 62841‑2‑8
:
a
h
=
7
m/s
2
, K =
1.5
m/s
2
.
1 609 92A 7MH | (27.04.2022)
Bosch Power Tools
