Bosch GLI DeciLED Professiona, Original Instructions Manual

Page: 18 / 65

18 | English
1 609 92A 0GE | (6.3.14) Bosch Power Tools
Assembly
Battery Charging (Accessory)

Use only the battery chargers listed on the accessories page. Only these bat-
tery chargers are matched to the lithium ion battery of your cordless worklight.
Note: The battery is supplied partially charged. To ensure full capacity of the battery,
completely charge the battery in the battery charger before using your power tool for
the first time.
The lithium-ion battery can be charged at any time without reducing its service life. In-
terrupting the charging procedure does not damage the battery.
The lithium ion battery is protected against deep discharging by the “Electronic Cell
Protection (ECP)”. When the battery is empty, the cordless worklight is switched off
by means of a protective circuit.

Do not continue to press the On/Off switch after the cordless worklight has
been automatically switched off.
The battery can be damaged.
To remove the battery 2 , press the unlocking button 3 and pull the battery out of the
cordless worklight. Do not exert any force.
Observe the notes for disposal.
Operation
Initial Operation
Inserting the battery
Insert the charged battery 2 into the lamp head 1 until you feel it engage.
Switching On and Off
To start the cordless worklight, press the On/Off switch 9 .
To switch off the cordless worklight, press the On/Off switch 9 again.
To save energy, only switch the cordless worklight on when using it.
Battery
Permitted ambient temperature
– when charging
– during operation*
– during storage
°C
°C
°C 0...+45
–10...+40
–20...+60
Recommended batteries GBA 10,8 V x,xAh O–.
* Limited performance at temperatures <0 °C
OBJ_BUCH-2104-002.book Page 18 Thursday, March 6, 2014 1:22 PM