English |
29
Bosch Power Tools
1 609 92A 0XP | (17/4/15)
User Mode
Surface temperature, ambient temperature and relative hu-
midity are measured in user mode. The dew point tempera-
ture and the average temperature (mean value of the surface
temperatures during a continuous measurement) are calcu-
lated based on these values.
You can hide the following values in the display as required:
average temperature, relative humidity, ambient tempera-
ture and dew point temperature.
To do so, open the
“Main Menu”
(see “Navigating the “Main
Menu””, page 30). Select the
“Functions”
submenu and then
“User Mode”
. There you can switch the indicators
“Average
Temp. ”
,
“Humidity”
,
“Room Temperature”
and
“Dew
Point”
on and off.
For surface temperature measurements you can choose
whether the minimum and maximum values
k
of the result
scale
l
are adapted automatically or defined manually. To do
so, go to the
“User Mode”
menu and then to the
“Scale
Range”
submenu.
– Select
“Auto”
if you want the values
k
to be determined au-
tomatically as in surface temperature mode. The minimum
and maximum temperature values of the measurement ap-
pear in the indicator
k
as soon as the difference between
the measured values is more than 3 °C.
– Select
“Preset”
to define the values manually. Set the de-
sired values in the
“User Mode”
menu under
“Scale Low-
er Limit”
and
“Scale Upper Limit”
. The manually set min-
imum and maximum values appear in the indicator
k
.
This enables you to, for example, make screenshots of dif-
ferent measurements comparable using the mark
q
.
To switch to user mode, return to the standard display screen
if not already on it. Then press the left-hand arrow button
15
or the right-hand arrow button
11
repeatedly until the
“User
Mode”
window is displayed with a brief explanation of the
mode. To hide the explanation prematurely, press the save
button
9
. To hide the explanation and immediately start a
measurement, press the measure button
4
.
Press the measure button
4
and aim the measuring tool per-
pendicular to the centre of the measuring object. The select-
ed values are displayed after completion of the measurement.
Data Transmission
Data Transmission via USB Interface
Fold open the cover
1
. Connect the micro USB socket
26
of
the measuring tool to your computer or notebook using the
micro USB cable provided
8
. The saved JPG files can be cop-
ied, moved or deleted from the internal memory of the meas-
uring tool. Close the cover
1
again when you remove the micro
USB cable.
Note:
Connect the measuring tool via USB only to a computer
or notebook. The tool may be damaged if connected to other
devices.
Note:
The battery pack of the measuring tool cannot be
charged via the USB interface. To charge the battery pack,
see “Operation with Battery Pack”, page 24.
Data Transmission via
Bluetooth
®
The measuring tool is equipped with a
Bluetooth
® module,
which enables data transmission via radio technology to cer-
tain mobile terminals/devices with a
Bluetooth
® interface
(e.g., smartphones, tablets).
Information about system requirements for a
Bluetooth
® con-
nection can be found on the Bosch website at
www.bosch-professional.com
.
To switch on the
Bluetooth
® connection on the measuring
tool, open the
“Main Menu”
(see “Navigating the “Main
Menu””, page 30) and set
“Bluetooth”
to
“On”
. The indicator
f
will appear on the display. Ensure that the
Bluetooth
® inter-
face is activated on your mobile terminal/device.
Special Bosch applications (apps) are available to extend the
functional range of the mobile terminal/device and for simpli-
fication of the data processing. Depending on terminal/de-
vice, these can be downloaded at the respective app stores:
The connection between mobile terminal/device and measur-
ing tool is established after the Bosch application has started
(if
Bluetooth
® modules are activated). If multiple active meas-
uring tools are found, select the appropriate measuring tool.
A connection will be established automatically if only one ac-
tive measuring tool is found.
Note:
When establishing the connection between the meas-
uring tool and the mobile terminal/device (e.g., smartphone,
tablet) the first time (pairing), the measuring tool’s PIN code
may be requested. In this case, enter “0000”.
When transmitting data by means of
Bluetooth
®, time lags
may occur between mobile terminal/device and measuring
tool as a result of poor reception conditions.
OBJ_BUCH-2270-002.book Page 29 Friday, April 17, 2015 9:48 AM