Bosch GID Series, Information For Use

Page: 37 / 104

PRF IU template project
en
37
Care instructions for stainless steel
surfaces
When taking care of and cleaning
stainless steel surfaces, use only
cleaning cloths and cleaning agents
suitable for stainless steel.
Tips
¡
To prevent visible scratches, wipe
the stainless steel surface in the
direction of the grain.
¡
Suitable cleaning agents and
cleaning cloths are available from
our customer service, your dealer
or on our website.
Preparing the appliance for cleaning
1.
"Switch off the appliance."
→
Page 34
2.
Disconnect the appliance from the
power supply.
Unplug the appliance from the
mains or switch off the circuit
breaker in the fuse box.
3.
Take out all of the food and store it
in a cool place.
Place ice packs (if available) onto
the food.
4.
If there is a layer of hoarfrost, allow
this to defrost.
5.
"Remove all fittings and accessor-
ies from the appliance."
→
Page 37
Cleaning the appliance
WARNING
Risk of electric shock!
¡
An ingress of moisture can cause
an electric shock.
▶
Do not use steam- or high-pres-
sure cleaners to clean the appli-
ance.
¡
Liquid in the lighting or in the con-
trols can be dangerous.
▶
The rinsing water must not drip
into the lighting or controls.
ATTENTION!
¡
Unsuitable cleaning products may
damage the surfaces of the appli-
ance.
▶
Do not use hard scouring pads
or cleaning sponges.
▶
Do not use harsh or abrasive
detergents.
▶
Do not use cleaning products
with a high alcohol content.
▶
Do not use stainless-steel clean-
ing agents on the outside of the
appliance.
¡
If you clean fittings and accessor-
ies in the dishwasher, this may
cause them to become deformed
or discolour.
▶
Never clean fittings and access-
ory in the dishwasher.
1.
"Prepare the appliance for clean-
ing." →
Page 37
2.
Clean the appliance, the fittings,
the accessories and the door seals
with a dish cloth, lukewarm water
and a little pH-neutral washing-up
liquid.
3.
Dry thoroughly with a soft, dry
cloth.
4.
Insert the fittings.
5.
Electrically connect the appliance.
6.
"Switch on the appliance."
→
Page 33
7.
Putting the food into the appliance.
Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the frozen food container
1.
Take out the frozen food container
as far as it will go.
2.
Lift the frozen food container at the
front and remove it ⁠.
→ Fig.
4