REVERSING OR REPLACING BLADES
To reverse or replace the blade
16
:
A. Loosen the clamping screws
20
with blade
wrench
17
.
B. If necessary, loosen the blade clamp
19
by
giving it a light blow with a wooden wedge.
C. With the blade clamp
19
loosened, push the
blade guard
8
down.
D. Use a piece of wood to slide the blade
16
lengthwise out of the blade/cutter drum
18
,
taking care to keep your fingers away from
the sharp edges of the blade (Fig. 3).
If the blade is gummed and difficult to remove,
you may clean the blade with mineral spirits,
lacquer thinner or alcohol.
Clean all surfaces before reinstalling the new
blade, as this will ensure an accurate blade
setting and proper tool performance.
BLADE ALIGNMENT
The blade should be centered relative to the
front
13
and rear
9
shoes (Fig. 4). Rotate the
blade drum
18
by hand to verify that the blade
doesn’t touch to any other part of the tool.
Make sure the blade sits correctly in the holder
groove of the cutter drum.
Ensure that the blade aligned flush with the side
edge of the rear shoe
9
(Fig. 4).
You may then secure the blade clamp
19
by
tightening the screws
20.
Your planer is ready
for use.
-9-
Assembly
18
19
20
17
9
13
FIG. 4
21
⌀ 35 mm
24
24
25
27
13
23
22
FIG. 5
SHAVINGS EXTRACTION
Do not reach into the
shavings ejector with
your hands. They could be injured by
rotating parts.
To ensure optimum extraction of shavings and
dust, always work with external dust extraction
or the shavings bag (both sold separately).
GHO12V-08 offers several ways of dealing
with wood shavings and dust (Fig. 5):
• Shavings diverter
Shavings diverter
13
lets you direct the flow of
shavings and dust to one of the sides of the
planer. To use it, simply insert the diverter
13
into the exhaust channel
27
on the side you
prefer the shavings to come out.
If you remove the diverter
13,
the shavings will
be ejected on both sides of the planer.
Clean the shavings diverter
13
regularly. For
that, switch off the power tool. Remove the
shavings ejector and shake it out. Use a
suitable tool (e.g. a piece of wood, etc.) to
clean a clogged shavings diverter.
• Shavings/dust bag
(Sold separately)
Shavings/dust bag
22
is suitable for small
volume tasks. It can be attached to either side
of the planer.
160992A3WD_GHO12V-08 10/16/17 2:57 PM Page 9
