English |
41
Bosch Power Tools
1 609 929 M02 | (8.10.07)
Carry out the planing procedure several times un-
til the requested rebating depth is reached.
Guide the planer applying sideward supporting
pressure.
Beveling with the Beveling Guide
When beveling rebates
and surfaces, adjust the
required slope angle
with the angle adjust-
ment
26
.
Maintenance and Service
Maintenance and Cleaning
f
Before any work on the power tool itself,
pull the mains plug.
f
For safe and proper working, always keep the
power tool and the ventilation slots clean.
Ensure easy operation of the park rest
29
and
clean it regularly.
When the carbon brushes wear below acceptable
service tolerances, the machine will automatical-
ly cut out. The machine must be sent to customer
service for maintenance (addresses, see “Service
and Customer Assistance” section).
If the power tool should fail despite the care tak-
en in manufacturing and testing procedures, re-
pair should be carried out by an after-sales ser-
vice center for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit article number
given on the type plate of the power tool.
Replacing the Drive Belt (see figures P–Q)
Unscrew screw
6
and take off the belt cover
7
.
Remove the worn drive belt
30
.
Before assembling a new drive belt
30
, clean
both pulleys
31
and
32
.
Place the new drive belt
30
on the small pulley
32
first and then work the drive belt
30
onto the
large pulley
31
by hand while rotating it.
Make sure that the drive belt
30
runs exactly in
the longitudinal grooves of the pulleys
31
and
32
.
Reattach the belt cover
7
and tighten with the
screw
6
.
After-sales service and customer assis-
tance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be found
under:
www.bosch-pt.com
Our customer consultants answer your questions
concerning best buy, application and adjustment
of products and accessories.
In case of a claim, repair or purchase of replace-
ment parts or in case of queries or other prob-
lems, please contact your local dealer or Bosch
representative.
People’s Republic of China
Website: www.bosch-pt.com.cn
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service Hotline: 800 8 20 84 84
Tel.: +86 (571) 87 77 43 38
Fax: +86 (571) 87 77 45 02
HK and Macau Special Administrative Regions
Melchers (H.K.) Ltd, Room 1210
Shun Tak Centre, West-Tower
168 – 200 Connaught Road, Central Hong Kong
Customer Service Hotline: +852 (25) 89 15 61
Fax: +852 (25) 48 79 14
E-Mail: [email protected]
Indonesia
PT. Multi Tehaka
Kawasan Industri Pulogadung
Jalan Rawa Gelam III No. 2
Jakarta 13930
Indonesia
Tel.: +62 (21) 4 60 12 28
Fax: +62 (21) 46 82 68 23
E-Mail: [email protected]
www.multitehaka.co.id
OBJ_BUCH-447-001.book Page 41 Monday, October 8, 2007 11:18 AM
