-14-
Service
Preventive maintenance
performed
by
unauthorized p e r s o n n e l m a y r e s u l t i n
m i s p l a c i n g
o f
i n t e r n a l
w i r e s
a n d
components which could cause serious
hazard.
We recommend that all tool service
be performed by a Bosch Factory Service
Center or Autho rized Bosch Service Station.
Tool Lubrication
Y o u r B o s c h t o o l h a s b e e n p r o p e r l y
l u b r i c a t e d a n d i s r e a d y t o u s e . I t i s
recommended that tools with gears be
regreased with a special gear lubricant at
every brush change.
Batteries
Be alert for battery packs that are nearing
their end of life.
If you notice decreased tool
performance or significantly shorter running
time between charges then it is time to
replace the battery pack. Failure to do so can
cause the tool to operate improperly or
damage the charger.
Bearings
Bearings which become noisy (due to heavy
load or very abrasive material cut ting)
s h o u l d b e r e p l a c e d a t o n c e t o a v o i d
overheating or motor failure.
Cleaning
Certain cleaning agents
and sol vents damage
plastic parts.
Some of these are: gasoline,
carbon tetrachlo ride, chlo rinated cleaning
solvents, ammonia and house hold detergents
that contain ammonia.
Ventilation openings and switch levers must
be kept clean and free of foreign matter. Do
not at tempt to clean by inserting pointed
objects through openings.
Maintenance
Accessories and Attachments
Included
Available separately
Dust bag
Sanding disc
Medium backing pad
Additional types of sanding discs
Soft backing pad
Hard backing pad
VAC024 Vacuum hose adaptor
Polishing bonnet
Foam buffing pad
Soft PSA backing pad
Replacement damper ring
Vacuum hoses
To avoid accidents always dis connect the tool from the power supply
before cleaning or performing any main tenance.
