14
| English
1 609 92A 2HL | (23.1.17)
Bosch Power Tools
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in hard and soft-
wood, as well as in particle and fibre board. In this, mitre an-
gles from –52° to +52° as well as bevel angles from –2° to
+47° are possible.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
Danger area! Keep hands, fingers or
arms away from this area.
Observe the dimensions of the saw blade.
The hole diameter must match the tool
spindle without play. Do not use reducers
or adapters.
Always adjust the saw-ta-
ble extensions properly
in order to underlay or
support long workpieces
at their free end.
Work-
pieces that are not suffi-
ciently underlaid can tilt or
tip over during sawing. This
can lead to injury or dam-
age the power tool.
Always saw with the dis-
tance-stops inserted.
Without distance-stops,
the contact surface is too
small and the workpiece
cannot be sufficiently se-
cured for sawing.
Symbols and their meaning
In order to saw workpieces higher than
75 mm, the distance-stops must be in-
serted at the front position
on both sides
.
The distance-stops always must be in line
to each other, so that a straight contact
surface for the workpiece is achieved.
For adjustment of random mi-
tre angles, the saw table must
move freely and the mitre de-
tent override must be
blocked:
– Pull lever
and at the
same time push the mitre
detent override
down-
ward at the front.
Clamping lever shut:
The set bevel angle of the tool
arm is locked.
Clamping lever open:
Adjusting bevel angles is pos-
sible.
Symbols and their meaning
100x100mm
OBJ_BUCH-3086-002.book Page 14 Monday, January 23, 2017 12:48 PM
