Bosch GCL100-40G, Operating/Safety Instructions Manual

Page: 11 / 48

-11-
Technical Data
Model Number GCL100-40G
Article number 3 601 K66 M10
Working range A)
– Visible laser line
– Laser lines with optional laser receiver
– Laser points
100 ft (30 m)
15 - 165 ft (5-50 m)
50 ft (15 m)
Leveling accuracy
B) C)
Laser lines
Laser points
±1/8 in. at 30 ft (±0.3 mm/m)
±9/32 in. at 30 ft (±0.7 mm/m)
Self-leveling range (typical) ±4°
Leveling duration (typical) <4s
Operating temperature 14˚F ~ 113 ˚F (-10˚C ~ +45 ˚C)
Storage temperature -4˚F ~ 158 ˚F (-20˚C ~ +70 ˚C)
Max. altitude 6560 ft (2000 m)
Relative air humidity, max. 90 %
Pollution degree according IEC 61010-1
D)
2
Laser class 2
Laser lines
– Laser type
– C
6
– Divergence
500–540 nm, < 10 mW
10
50 x 10 mrad (full angle)
Laser points
– Laser type
– C
6
– Divergence
500–540 nm, < 1 mW
1
0.8 mrad (full angle)
Compatible laser receiver LR8
Tripod mount 1/4”-20
Batteries 4 x 1.5V LR6 (AA)
Weight 1.28 lb (0.58 kg)
Dimensions
– Without holder
– With rotating mount RM 10
5” x 2.5” x 4.5” (126 x 63 x 115 mm)
5.7” x 2.5” x 7.1” (145 x 63 x 180 mm)
Protection rating
E)
IP 64 (dust tight and splash water
protected)
A) The working range may be reduced by unfavourable environmental conditions (e.g. direct sunlight).
B) At 20–25 °C
C) The values stated presuppose normal to favourable environmental conditions (e.g. no vibration, no fog, no
smoke, no direct sunlight). Extreme fluctuations in temperature can cause deviations in accuracy.
D) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by condensation is
expected.
E) Excludes battery compartment.
The serial number (10) on the type plate is used to clearly identify your measuring tool.