18
| English
1 609 929 W79 | (22/4/10)
Bosch Power Tools
Technical Data
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 93 dB(A);
Sound power level 104 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Hammer drilling into concrete: Vibration emis-
sion value a
h
=10 m/s
2
, Uncertainty K=1.5 m/s
2
,
Chiselling: Vibration emission value a
h
=8 m/s
2
,
Uncertainty K=1.5 m/s
2
.
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Rotary Hammer
GBH 5-40 DCE Professional
Article number
3 611 B64 0..
Rated power input
W
1150
Rated speed
min
-1
170 – 340
Impact rate
– Drilling mode
– Chiselling mode
min
-1
min
-1
1500 –2900
1500 –3050
Impact energy per stroke according to
EPTA-Procedure 05/2009
– Drilling mode
– Chiselling mode
J
J
2 –10
2 –11
Chisel positions
12
Tool holder
SDS-max
Lubrication
Central permanent lubrication
Max. drilling dia.
– Concrete (with twist drill)
– Concrete (with break-through drill bit)
– Brickwork (with core bit)
mm
mm
mm
40
55
90
Weight according to EPTA-Procedure 01/2003
kg
6.8
Protection class
/
II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may
vary.
OBJ_BUCH-491-004.book Page 18 Thursday, April 22, 2010 1:32 PM
