14
| English
1 609 929 S23 | (19.2.09)
Bosch Power Tools
Declaration of Conformity
We declare under our sole responsibility that
the product described under “Technical Data” is
in conformity with the following standards or
standardization documents: EN 60335 accord-
ing to the provisions of the directives
2006/95/EC, 2004/108/EC.
01
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
19.01.2009
Assembly
f
Before any work on the vacuum cleaner it-
self, pull the mains plug.
Replacing/Inserting the Dust Bag
(see figure A)
– Unlock the latches
10
and remove the vacu-
um lid
3
.
– Pull off the full dust bag
11
from the connec-
tion flange toward the rear. Close the open-
ing of the dust bag by folding down the lid.
Remove the closed dust bag from the vacu-
um cleaner.
– Slide the new dust bag
11
over the connec-
tion flange of the vacuum cleaner. Make sure
that the full length of the dust bag
11
faces
against the inner wall of the container
9
.
Reattach the vacuum lid
3
.
– Lock the latches
10
.
For dry vacuuming operation, a dust bag
11
should be inserted. When operating with a dust
bag
11
, the folded filter
12
clogs slower, the vac-
uuming performance is kept up longer and the
disposal of dust becomes easier.
Mounting the Vacuum Hose
(see figure A)
Mount the vacuum hose
8
onto the hose connec-
tion piece
7
and turn it in clockwise direction to
the stop.
Insert the extension tubes firmly into each oth-
er.
Note:
Bosch recommends using static-discharg-
ing hoses with a hose Ø of 19 or 35 mm.
Operation
Starting Operation
f
Observe correct mains voltage! The voltage
of the power source must agree with the
voltage specified on the nameplate of the
vacuum cleaner. Equipment marked with
230 V can also be operated with 220 V.
f
Switch the vacuum cleaner off immediately
as soon as foam or water comes out, and
empty the container.
Otherwise, the vacuum
cleaner can become damaged.
Symbols on the Mode Selector Switch
Switching On and Off
To
start the operation
of the vac, set the mode
selector switch
4
to
on
.
To
switch off
the vac, set the mode selector
switch
4
to
off
.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
on
Switching On
off
Switching Off
Electromagnetic filter cleaning
Operation with remote automatic
switching
OBJ_BUCH-464-003.book Page 14 Thursday, February 19, 2009 12:48 PM
