12
| English
1 609 92A 3TD | (21.9.17)
Bosch Power Tools
Product Description and Specifica-
tions
Intended Use
The vacuum cleaner is intended for vacuuming dry materials
that are not harmful to one’s health.
Use the vacuum cleaner only when you fully understand and
can perform all functions without limitation, or have received
appropriate instructions.
Rotational Airflow
The bagless filter system removes the need to use dust bags.
Dirt is collected on the inside wall of the container.
Product Features
The numbering of the product features refers to the illustra-
tion of the vacuum cleaner on the graphics page.
1
Coarse dirt filter
2
Release button for dust cup
3
On/Off button
4
Handle
5
Battery pack *
6
Motor housing
7
Dust cup
8
Emptying flap release button
9
Emptying flap
10
Extension tube
11
Floor nozzle
12
Battery port
13
Battery unlocking button
14
Crevice nozzle
15
Flexible extension tube
16
Filter grips
17
Filter
18
Rotational Airflow unit with Filter
19
Filter locking tab
20
Wall bracket*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Assembly
Battery Charging
Use only the battery chargers listed on the accessories
page.
Only these battery chargers are matched to the lith-
ium-ion battery pack used in your vacuum cleaner.
Note:
The battery supplied is partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The battery must be removed from the vacuum cleaner to
charge it.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
The lithium-ion battery is protected against deep discharging
by the “Electronic Cell Protection (ECP)”. When the battery is
empty, the machine is switched off by means of a protective
circuit: The inserted tool no longer rotates.
Following the automatic shut-off of the vacuum clean-
er, do not continue to press the On/Off button.
The bat-
tery can be damaged.
The battery is equipped with a NTC temperature control
which allows charging only within a temperature range of be-
tween 0 °C and 45 °C. A long battery service life is achieved
in this manner.
A significantly reduced working period after charging indi-
cates that the battery is used and must be replaced.
Observe the notes for disposal.
Battery Insertion/Removal (see figures A1 – A2)
Do not use force to insert the battery.
The battery is de-
signed in such a way that it can only be inserted into the
vacuum cleaner when it is in the right position.
– Slide the battery pack
5
all the way into the battery port
12
.
– To remove the battery
5
, press the unlocking button
13
on
the battery and pull it out of the battery bay
12
.
Cordless dry vacuum cleaner
GAS 18V-1
Article number
3 601 JC6 2..
Container volume (gross)
l
0.7
Vacuum, max.
*
kPa
6
Airflow, max.
*
l/s
10
Weight according to EPTA-
Procedure 01:2014
kg
1.3
Technical Data varies depending on filter used.
*depending on the battery pack being used
** limited performance at temperatures <0 °C
Permitted ambient temperature
– during charging
– during operation
**
and during
storage
°C
°C
0...+45
–20...+50
Recommended batteries
GBA 18V..
GBA 18V... W
Recommended chargers
GAL 18...
GAL 18... W
Cordless dry vacuum cleaner
GAS 18V-1
Technical Data varies depending on filter used.
*depending on the battery pack being used
** limited performance at temperatures <0 °C
OBJ_BUCH-3129-003.book Page 12 Thursday, September 21, 2017 5:19 PM
