10
| English
(20)
Wet filter
(21)
Crevice nozzle
(22)
Rubber lip
(23)
Brush inserts
(24)
Floor nozzle
(25)
Suction tube
(26)
Snap fastener
(27)
Intake port
(28)
Clips for securing the plastic bag
(29)
Filter holder
(30)
Filter basket
(31)
False air intake
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Wet/dry dust extractor
GAS 15
GAS 15 PS
Article number
3 601 JE5 0..
3 601 JE5 1..
Rated power input
W
1100
1100
Frequency
Hz
50–60
50–60
Container volume (gross)
l
15
15
Net volume (liquid)
l
8
8
Dust bag volume
l
8
8
Max. vacuum
A)
– Dust extractor
kPa
22
22
– Turbine
kPa
22
22
Max. flow rate
A)
– Dust extractor
l/s
33
33
– Turbine
l/s
53
53
Automatic start/stop
–
●
Weight according to EPTA-Procedure 01:2014
kg
9.6
9.6
Protection class
/ II
/I
Protection rating
IPX4
IPX4
A) Measured using a vacuum hose 3 m long and 35 mm in diameter
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Automatic start/stop
A)
Rated voltage
Maximum power
Minimum power
JP
100 V
1050 W
100 W
TW
115 V
1050 W
100 W
CN
220 V
1100 W
100 W
High voltage
220–240 V
2200 W
100 W
A) Permitted connected load of the connected power tool (country-specific)
Assembly
u
Pull the plug out of the socket before cleaning or per-
forming maintenance on the vacuum cleaner, making
tool adjustments, changing accessories or putting
away the vacuum cleaner.
This safety measure prevents
the vacuum cleaner from being started accidentally.
Fitting the vacuuming accessories (see figure A)
The vacuum hose
(16)
is equipped with a clip system which
can be used to connect vacuuming accessories (dust extrac-
tion adapter
(14)
, curved nozzle
(17)
).
Fitting the nozzles and tubes
– Push the curved nozzle
(17)
onto the vacuum hose
(16)
until you hear both snap fasteners
(26)
on the vacuum
hose engage.
– Then attach the required extraction accessory (floor
nozzle, crevice nozzle, suction tube, etc.) firmly to the
curved nozzle
(17)
.
– To remove the accessory, press the snap fasteners
(26)
inwards and pull apart the components.
Fitting the dust extraction adapter
GAS 15
1 609 92A 4FZ | (01.04.2021)
Bosch Power Tools
