Bosch FWA 4650, Initial Operation And Retrofit Kit, Page: 60 / 82

1 690 706 220 2016-09-14
|
Robert Bosch GmbH
60 | FWA 4650 | Installing WLAN adapter en
i
WLAN network link designation:
A sticker with the appropriate information can be
found on the top of the WLAN-Box housing.
Fig. 20: Network key sticker on WLAN-Box
1. Click onto the network link (= "Network ID") for the
WLAN-Box.
 The "Establish link automatically" check box and
the "Connect" button appear.
Fig. 21: WLAN network links
Status = Link detected and marked, not yet connected
2. Check whether the "Establish link automatically" box
has been marked.
i
Automatic establishment of WLAN network link:
This link is established automatically each time the
operating system is started.
3. Click onto the "Connect" button.
 The "Establish link with new network" progress
window opens up.
Fig. 22:
 The "Network key" input window opens up.
Fig. 23: Network key input window
4. Enter the Network key.
i
The network key can be found on the sticker on the
WLAN-Box.
5. Press the "OK" button.
 The "WLAN network links" window opens up.
Fig. 24: WLAN network links
Status = connected
 WLAN adapter connected to WLAN-Box.
i
WLAN network link status = no internet access has
no influence on operation of the WLAN-Box.
!
After installing the measurement program, the
network addresses of the LAN adapter fitted in the
PC/ Laptop and the WLAN adapter must be altered
manually.
i
See "Network" Section for changing the network
address.
"
This completes WLAN network link configuration.