6 720 645 347 (2010/09)
54
|
Menu settings INSTALLER SETTINGS (for contractors only)
8
Menu settings INSTALLER SETTINGS
(for contractors only)
Detailed instructions on navigating through the
menu structure, programming, deleting settings
and resetting to the factory settings are provided
in chapter 5.2 starting on page 22.
8.1 Summary and settings of the
INSTALLER SETTINGS menu
The tables below provide the following:
•
An overview of the menu structure (column 1).
The menu depth is identified by various
shades of grey.
For example,in menu
Solar sys parameters
submenus
1. Standard system
and
Solar
optimisation
are on the same level.
•
An overview of the factory settings
(column 2), e.g. for the purposes of resetting
individual menu points to their factory setting.
•
An overview of the adjustment ranges of the
individual menu points (column 3).
•
Space for making a note of your personal
settings (column 4).
•
For locating detailed descriptions regarding
the individual menu points (column 5).
The
INSTALLER SETTINGS
menu is
intended only for contractors.
B
To open
INSTALLER SETTINGS
:
Hold down
for approx.
3 seconds.
menu
The menu points are only shown if
the system components are
installed and/or active. Some menu
points are not shown because they
are switched off by a setting for
another menu point.
B
Always set or skip menu points in
order. In that way, subsequent
menu points will be
automatically adjusted or not
shown.
