FlexiDome2X
Connection and set-up | en
23
Bosch Security Systems
Installation Manual
AR18-08-B010 | v1.0 | 2009.03
4.2
Setting up the camera
4.2.1
Camera positioning
To assist in setting up the camera, connect a monitor to the
miniature 2.5 mm jack socket (2). This socket provides a
composite video signal (with sync). An optional cable (code
number S1460) is available for making this connection. When
the S1460 cable is attached, there is no video available on the
BNC connector to avoid interference.
Figure 4.1
Camera parts
!
CAUTION!
The Heater will be
hot
when in operation -
Do not touch
.
Always switch the heater
off
when working on the camera, refer
to
Section 4.2.4 Heater, Page 26
and
Section 5.6.2 Connections
submenu, Page 42
.
1.
Heater
2.
Monitor jack socket
3.
Thumbwheels
A
B
C
Summary of Contents for FlexiDome2X VDN-498V03
Page 1: ...FlexiDome2X VDN 0498 en Installation Manual ...
Page 2: ......
Page 57: ......
Page 58: ...Bosch Security Systems www boschsecurity com Bosch Security Systems 2009 ...
