FLEXIDOME HD VR
Installation | en
31
Bosch Security Systems
Installation Manual
AM18-Q0637 | v1.1 | 2013.08
1.
To rotate the image 180°, press and hold the
Menu
button
until the image flips.
2.
Briefly press the
Menu
button to set the start position for
the automatic motorized focus adjustment.
–
You will hear the motorized automatic back focus
process running.
–
The progress is shown on the monitor.
3.
Briefly press the
Menu
button again and again to scroll
through the preset zoom positions.
–
The selection loops back to the beginning when you
reach the last one.
4.
When you reach the desired zoom position, use a long
press of the
Menu
button to set the zoom position and to
re-focus.
5.
If the camera is not correctly focussed, press the
Menu
button for a longer time to restart the wizard.
If the camera is correctly focussed, press the
Menu
button
for a short time to change the analog output.
6.
To change the analog output state, press the
Menu
button
for a short time.
–
Briefly press the
Menu
button again and again to
select
NTSC on
,
PAL on
or
OFF
(default).
7.
When the selection is made, use a long press of the
Menu
button to save the results.
–
The zoom and focus position is stored.
–
The iris is set to its original value.
–
The video service output is disabled.
–
The BNC video output is set to its selected state.
Note:
If the BNC video output is set to
On
, the second IP stream is
disabled.
5.8
Closing the unit
When the camera position is set and all adjustments have been
made, close the unit.
