Bosch FAH-420, Operation Manual

Page: 30 / 50

MPA technical specifications
Weight Approx. 65 g
VdS approval number G 294 052
Service and Detector Test Accessories
SOLO200 Detector Removal Tool
The pivoting grips and three different diameters make the
SOLO200 Detector Removal Tool suitable for removing
and replacing most fire detectors.
The plastic caps enable the fire detector to be securely
gripped and protect the detector surface against damage.
RTL-cap plastic caps for the SOLO200 Detector Removal
Tool
Scope of delivery = 2 pieces
FME-420-ADAP Tool Adapter for MS 420
The FME-420-ADAP Tool Adapter can be used in addition
to the SOLO200 Detector Removal Tool. The plastic bowl
and the adapter pole optimize the insertion and removal
of fire detectors when using detector bases with springs
(MS 420, FAA-MS 420-R-SP).
Note: Only use the plastic bowl in conjunction with the
adapter pole. On the adapter pole there is a rubber
bearing that cushions the turning motion when removing
the fire detectors and prevents damage.
6.8
30 en | Accessories
Automatic Fire Detectors LSN
improved
12/2012 | 8.1 | F.01U.003.448 Operation Guide Bosch Sicherheitssysteme GmbH