Install the Optional Media Storage Card
The camera can accept a customer-supplied SDHC or SDXC memory card (hereafter referred
to as “SD card”) for local storage. (The camera will not accept MicroSD cards.) Using an SD
card is optional.
!
Caution!
Risk of electrostatic discharge!
Use proper CMOS/MOS-FET handling precautions and observe proper ESD safety precautions
(such as wearing grounded wrist straps) to avoid electrostatic discharge.
Note: Disconnect power to the camera while adding or removing an SD card.
Ideally, you should install the card before connecting cables and mounting the camera. To
install the card, follow these steps:
!
Warning!
DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE MAY BE PRESENT.
Note: You may need to remove the sunshield to remove the front end cap more easily.
1. Loosen the set screw on the front end cap using the supplied hex key.
2. Loosen the front end cap using the supplied multi-use tool. To prevent damage to the o-
ring, for every half turn counterclockwise turn back one quarter turn clockwise.
3. Unscrew the front end cap by hand.
Figure 5.1: Remove the front end cap
5
EXTEGRA IP 9000 FX
Install the Optional Media Storage Card | en
19
Bosch Security Systems
Installation Manual / Guide d'installation
2016.02 | 1.2 | F.01U.319.357
