Bosch EX40N, Installation Instructions Manual

Page: 9 / 37

3
INITIAL PREPARATIONS

Determine the operating voltage at the
installation site. The camera has been pre-
wired for 24V ac operation before shipment.
See
Section 2, Input Power Connections.

Determine the optimum location for the
camera. Section 3, Mounting-Camera Base.

All cameras have been tested prior to
shipment. After the wiring has been
reconnected, it is advisable to check the
camera’s operation before installation.

ESD protection – Cameras and circuit boards
are sensitive electronic components. It is
recommended to wear a ground strap to
ground any static charge. (Alternative: touch a
grounded metal plate for at least a minute
before proceeding with any disassembly)
GUIDELINES
The installation of the EX40N camera is explained
in Sections 1 to 5 listed below. It is important that
these steps are followed in sequence:
1. Dome Removal
2. Input Power Connections
3. Mounting - Camera Base
4. Camera /LED Adjustments
5.
Camera Re-Assembly