Safety Instructions
Preparation
Installation
Final Steps
... Our Inspiration
English • 1
Please read all instructions before using this appliance.
PARTS PROVIDED:
•
Anti-Tip Bracket
•
Terminal Lugs (For Use With Hard Wire Installations)*
* Not necessary for Canadian installations.
PARTS NEEDED:
•
50 Amp Power Supply Cord Kit*
•
Measuring Tape
•
Phillips head Screwdriver
•
1-1/4” Wrench
•
Pencil
•
T-20 Torx Screwdriver
•
Screws (2) and Anchors (2) for Anti-tip Bracket
(Style will vary depending on mounting surface)
•
Level
•
Drill and Drill Bit
•
Safety Gloves and Goggles
•
Torque Wrench (For Hard Wire Installation Only)*
•
Tape (Optional)
•
Cloth or cardboard (Optional - to Protect Floor)
Important Safety Instructions
Table of Contents
•
Remove all tape and packaging before using
the range.
Destroy the packaging after unpacking
the range. Never allow children to play with
packaging material.
•
Be sure your appliance is properly installed
and grounded by a qualified technician
in
accordance with the National Electrical Code ANSI/
NFPA No. 7 latest edition and local electrical code
requirements.
Important: Local codes vary. Installation, electrical
connections and grounding must comply with all
applicable codes.
•
Install only per installation instructions
provided in the literature package for this
range.
•
Ask your dealer to recommend a qualified
technician
and an authorized repair service.
•
Know how to disconnect the power
to the
range at the circuit breaker or fuse box in case of
an emergency.
•
Do not repair or replace any part of the
appliance unless specifically recommended
in the manuals.
All other servicing should be
done by a qualified technician. This may reduce
the risk of personal injury and damage to the
range.
•
Never modify or alter the construction of a
range
by removing leveling legs, panels, wire
covers, anti-tip brackets/screws, or any other part
of the product.
•
DO NOT LIFT RANGE BY DOOR HANDLE.
Remove the door for easier handling and
installation. See ‘Removing Oven Door’ in the
Maintenance section of the Use and Care Manual.
If the information in this manual is not followed exactly, a fire or explosion may result
causing property damage, personal injury or death.
WARNING
Important Safety Instructions .............................................................................................. 1
Preparation ........................................................................................................................ 2
Installation ......................................................................................................................... 4
Final Steps ......................................................................................................................... 6
Unit is heavy and requires at least two people or
proper equipment to move.
CAUTION
Do not use the warming drawer(if equipped) or
oven for storage.
Hidden surfaces may have sharp edges. Use
caution when reaching behind or under range.
Before installing, turn power OFF at the service
panel. Lock service panel to prevent power
from being turned ON accidentally.
WARNING
Stepping, leaning or sitting on the doors or
drawers of this range can result in serious
injuries and also cause damage to the range.
Do not allow children to climb or play around
the range. The weight of a child on an open
door may cause the range to tip, resulting in
serious burns or other injury.
Do not store items of interest to children in the
cabinets above a range or on the backguard of a
range. Children climbing on the range to reach
items could be seriously injured.
ADDITIONAL PARTS NEEDED FOR
HARD WIRE INSTALLATIONS:
•
Flexible Conduit (For Hard Wire Installation Only)
•
Torque Wrench (For Hard Wire Installation Only)
•
Note:
Power Supply Cord Kit Not Necessary For
Hard Wire Installations
Summary of Contents for ELECTRIC FREE-STANDING CONVECTION RANGE
Page 2: ......
